Bedienungsanleitung Pioneer XDJ-AERO (Seite 34 von 37) (Englisch)

491973

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Functions and operations

Problem Check Remedy

Can’t crossfade.

Is the [CROSS F. CURVE (THRU,

, )] (cross-

fader curve selector) switch set to [THRU]?

Set the [CROSS F. CURVE (THRU, , )] (crossfader curve selector) switch

to a position other than [THRU]. (Page 23)

Back cue function does not work. Is a cue point set? Set a cue point. (page 17)

No effect. Is one of the [FX SELECT] buttons (TRANS,

FLANGER, ECHO or ROLL) pressed?

Press one of the [FX SELECT] buttons (TRANS, FLANGER, ECHO or ROLL). (page

21)

Is the [LEVEL/DEPTH] control set to the center

position?

Turn the [LEVEL/DEPTH] control clockwise or counterclockwise. (page 21)

Is the [BEAT] control set to the proper position? Set the [BEAT] control to the proper position. (page 21)

[SYNC] function does not work. Has the music file been analyzed? Analyze the file. (page 26)

[SYNC] function does not work even

when files are analyzed.

Is the beat grid irregular?

Is the beat grid properly tapped?

Set the beat grid properly. (page 26)

Are the BPMs of the tracks in the two decks too

different?

The [SYNC] function will not work properly if the BPM of the track on the deck for

which the [SYNC] button is pressed is outside the adjustable tempo range of the

track on the deck for which the [SYNC] button is not pressed.

Are you scratching? The [SYNC] function is disabled when scratching.

Recording is not possible. Is the external device or microphone properly

connected?

Check the connection of the external device or microphone. (page 10)

Is the channel you want to record properly

selected?

Select the channel you want to record properly.

Auto mixing is not possible. Is a track on a playlist selected? Select a track on a playlist.

Are there at least two playable tracks on the

playlist?

Put at least two playable tracks on the playlist.

Are the [DECK1, PHONO1/LINE1] and [DECK2,

PHONO2/LINE2] selector switches set to the

proper positions?

When the [DECK1, PHONO1/LINE1] and [DECK2, PHONO2/LINE2] selector

switches are set to the [PHONO/LINE] side, the auto mixing function cannot be

used. Set both selector switches to the [DECK] side. (page 25)

Settings are not stored in the memory. Has the power been turned off directly after

changing the setting?

After changing settings, wait at least 10 seconds before turning the power off.

USB devices

Problem Check Remedy

USB device is not recognized. Is the USB device properly connected? Connect the device securely (all the way in).

Is the USB device connected via a USB hub? USB hubs cannot be used.

Is the USB device supported by this unit? This unit supports such USB mass storage class USB devices as external hard

disks and portable flash memory devices.

Is the file format supported by this unit? Check the file format of the connected USB device. For the file formats sup-

ported by this unit, see Playable USB devices on page 5.

Are you using a USB device (such as a bus power-

driven hard disk) whose current is higher than this

unit’s rated current (500 mA)?

Use a USB device within this unit’s rated current (such as a hard disk driven by

an AC adapter or other external power supply).

— Turn the power off, wait 1 minute, then turn the power back on.

Time is required to read USB devices

(flash memory drives and hard discs).

Is there a large number of folders or files recorded

on the USB device?

When there are many folders or files, some time may be required for loading.

Are files other than music files stored on the USB

device?

When files other than music files are stored in folders, time is required to read

them as well. Do not store files or folders other than music files on the USB

device.

Playback does not start when a track

is loaded from a USB device.

Are the files playable? See Playable music file formats on page 5.

Is the auto cue function activated? Press the [TIME(AUTO CUE, QUANTIZE)] button for over 1 second to cancel the

auto cue function. (page 19)

No sound is produced or the sound is

faint when playing a track recorded on

a USB device.

Is the [MASTER LEVEL] control set to the proper

position?

Adjust the [MASTER LEVEL] control so that the master level indicator’s orange

indicator lights at the peak level before recording. (Page 23)

Sound is distorted when playing a

track recorded on a USB device.

Is the [TRIM] control set to the proper position? Adjust the [TRIM] control so that the channel level indicator’s orange indicator

lights at the peak level before recording. (Page 23)

File cannot be played. Is the file copyright-protected (by DRM)? Copyright-protected files cannot be played.

Music files cannot be played. Are the music files damaged? Play music files that are not damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer XDJ-AERO Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer XDJ-AERO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info