680967
24
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
24 | Adam
Good to know
Alternative ways to connect to
the internet
The recommended way to connect with
internet you can nd on page 22. Prefer
an alternative way to connect? Choose one
of the following options to connect Adam
with the internet.
» Option a: Internet via network cable
» Option b: Wi via Android app
» Option c: Wi via WPS
Option a: Internet via network cable
Connect a network cable between
the router and Adam.
Option b: Wi via Android app
Do you want to connect
Adam to wi and do you
have an Android device?
Search for the Plugwise
Connect app at the Google Play Store. The
app will guide you through the process of
connecting Adam to the wi network.
Option c: Wi via WPS
Wi via WPS is only supported via a
special WPS button on your wi
router.
Press the black button on Adam for 2
seconds and release.
Wait until the upper
light is blinking
quickly and regularly.
Enable WPS on the wi router to
connect to your wi network.
In case after 2 minutes Adam has not
made a connection yet to your wi
network, Adam will switch back to
access point mode.
Issues using wi
I cannot nd the Adam wi network,
what to do?
Ensure that Adam is not already connected
to the internet via a LAN cable. Wait until
Adam has booted up completely before
connecting to it. If the
and lights are
ashing slowly after you connect Adam to
the plug socket, this means Adam is in
access point mode. Only then it is possible
to nd the Adam network among the wi
networks. Is Adam not in access point
mode? Then reset the network
connection.
How do I reset the network connection?
Press the black button on Adam.
Release the button when the
light
has blinked 5 times (the light is
blinking once each second) and the
light starts to blink rapidly. The
network settings will be deleted.
Wait until Adam has booted up. The
lights
and are blinking slowly.
Then try to connect Adam to your wi
network again as described at page
22.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Plugwise Adam wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info