680967
26
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
26 | Adam
Issues with heating
The temperature settings of my
thermostat are missing
Adam retrieves the measured temperature
from your room thermostat and sends the
desired temperature to the thermostat
using the so called “override” functionality
of the OpenTherm protocol. It is up to the
thermostat to “do something” with this
temperature setting. Based on the
measured temperature and set
temperature the regulation determines
whether the boiler should start heating up
the house.
Thermostats that use OpenTherm do not
always do this in the same way. It is
possible that your thermostat does not
support above mentioned functionalities
or that you rst have to switch it on. Some
commonly used thermostats that have
been extensively tested and at that are
supported are:
» Plugwise Anna (24V)
» Honeywell Round Modulation
» Honeywell Chronotherm Touch
» Remeha iSense (after contact with support)
You can also install zone thermostat Lisa
instead of your existing central room
thermostat.
Is your thermostat not in this overview or
is it not working as mentioned, please do
not hestitate to contact Plugwise.
The boiler protocol is not detected
correctly
Check if Adam is connected to the
correct connections of the boiler.
Remove power from the boiler and
Adam.
Power up the boiler and wait until the
boiler has booted up.
Power up Adam an wait until it has
started up, the
light is on.
Check now if the correct boiler
protocol is detected: go via the menu
to Settings > Heating system > Boiler.
Not the correct boiler protocol? Click
update boiler protocol.
I have installed zone heating but my
house is no longer warming up
For zone heating to work properly, the
Plugwise regulation should be switched
on. You can check this in the local web
interface of Adam: Settings > Heating
system > Heating. When you switch on the
Plugwise regulation, the regulation of the
thermostat is being ignored.
Make sure that the heating source to
which you have connected Adam is the
only heating source in your heating system
and that Adam has full access to control
this heating source.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Plugwise Adam wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info