Bedienungsanleitung Polar M460 (Seite 71 von 74) (Englisch)

691220

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

There is plenty of variation between how different Android devices handle the technologies used in our products and

services, such as Bluetooth Low Energy (BLE) and different standards and protocols. Because of this, compatibility var-

ies between phone manufacturers, and unfortunately Polar cannot guarantee that all features can be used with all

devices.

The Polar M460 training device applies the following patented technologies, among others:

• OwnIndex® technology for Fitness test.

WATER RESISTANCE OF POLAR PRODUCTS

Most Polar products can be worn when swimming. They are not, however, diving instruments. To maintain water res-

istance, do not press the buttons of the device under water. When measuring heart rate in water with a GymLink com-

patible Polar device and heart rate sensor, you may experience interference for the following reasons:

l Pool water with high chlorine content, and seawater are very conductive. The electrodes of the heart rate

sensor may short-circuit, preventing ECG signals from being detected by the heart rate sensor.

l Jumping into water or strenuous muscle movement during competitive swimming may shift the heart rate

sensor to a location on the body where ECG signals cannot be picked up.

l The ECG signal strength is individual and may vary depending on the individual’s tissue composition. Problems

occur more frequently when measuring heart rate in water.

Polar devices with wrist-based heart rate measurement are suitable for swimming and bathing. They will col-

lect your activity data from your wrist movements also when swimming. In our tests, however, we found that the

wrist-based heart rate measurement doesn’t work optimally in water, so we cannot recommend wrist-based heart rate

measurement for swimming.

In the watch industry, water resistance is generally indicated as meters, which means the static water pressure of that

depth. Polar uses this same indication system. Water resistance of Polar products is tested according to International

Standard ISO 22810 or IEC60529. Every Polar device that has water resistance indication is tested before the delivery

to stand water pressure.

Polar products are divided into four different categories according to their water resistance. Check the back of your

Polar product for the water resistance category, and compare it to the chart below. Please note that these definitions

do not necessarily apply to products of other manufacturers.

When performing any underwater activity, the dynamic pressure generated by moving in water is greater than the

static pressure. This means that moving the product under water subjects it to a greater pressure than if the product

were stationary.

Marking on the back

of the product

Wash

splashes,

sweat, rain-

drops etc.

Bathing and

swimming

Skin diving

with snorkel

(no air tanks)

SCUBA

diving

(with air

tanks)

Water resistant char-

acteristics

Water resistant IPX7 OK - - - Do not wash with a pressure

washer.

Protected against splashes,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Polar M460 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Polar M460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info