POWAIR0012 EN
Copyright © 2018 VARO P a g e | 5 www.varo.com
9 MAINTENANCE
This air cut off tool requires lubrication BEFORE Initial use and BEFORE
and AFTER each additional use throughout its life.
▪ WARNING Disconnect the air cut off tool from the air supply and hold it with air inlet
up.
▪ Pull the trigger, put one teaspoon of air tool oil in the air inlet, and then switch the
reverse button in both directions to help circulate oil in the motor.
▪ Reconnect the air cut off tool to the air supply and cover the exhaust port with a towel
and run for 20 seconds Oil will discharge from the exhaust port when air pressure is
applied.
WARNING! Any excess oil in the motor is immediately expelled from the
exhaust port. Always direct exhaust port away from people or objects.
10 STORAGE
The air cut off tool must be lubricated before storing Follow the air motor lubrication
instructions. Only run for 10 seconds Instead of 20 seconds because more oil needs to
remain in the tool when storing.
11 TECHNICAL DATA
13 TROUBLE SHOOTING
The following form lists the common operating system with problem and solutions. Please
read the form carefully and follow it.
