POWE80050 EN
Copyright © 2018 VARO P a g e | 6 www.varo.com
▪ Carry out the cut steadily, evenly and with moderate pressure appropriate to the material
being cut. Ensure you work in the correct direction! Always work against the direction of
rotation as shown on the machine’s protective guard to avoid the risk of the machine being
forced uncontrolled of the cut.
▪ After completing the retract the machine slightly, switch off and remove from the cut.
12 MAINTENANCE
Disconnect the unit from the mains before carrying out any maintenance or
adjustments.
The machine requires very little maintenance.
▪ Ensure that the ventilation slots are not blocked and clean the machine regularly with a
soft cloth, clean the ventilation slots using a vacuum cleaner.
▪ Mains cables and carbon brushes may only be replaced by our technical department.
▪ Remove the diamond cutting discs and clean the motor flange, the flange nut and the
protective guard after finishing work.
▪ Carefully check the diamond cutting discs for signs of damage such as broken segments
etc.
▪ Damaged cutting discs must be replaced immediately.
▪ In case of a breakdown, have the machine repaired by our technical department.
13 TECHNICAL DATA
15 WARRANTY
▪ This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
▪ This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
