POWEG4500 EN
Copyright © 2020 VARO P a g e | 7 www.varo.com
▪ In case of damage and improper use of the battery, vapours may be emitted. In case of
complaints, provide for fresh air and consult a physician. The vapours can irritate the
respiratory system.
7 OPERATION
7.1 Charging procedure
The battery charger supplied matches only to the Li-ion battery installed in POWEG4500. Do
not use other battery chargers.
The Li-ion battery is protected against deep discharging.
When the battery is empty, the machine is switched off by means of a protective circuit: The
blade (1) no longer moves and a slight whistling sound can be heard.
7.2 Charging the battery
The charging process starts as soon as the small plug is inserted in the machine and when the
mains plug of the battery charger is inserted in the socket.
During the charging procedure, the handle of the machine warms up. This
is normal.
When not using for extended periods, disconnect the battery charger from
the socket.
Do not use the machine during the charging procedure.
7.3 Switching on/off
7.3.1 Security key (Fig. 1)
Pull out the security key before you replace the blades!
The security key controls the on/off stand.
▪ The security key pulled out: the machine doesn’t work.
▪ The security key plugged into the machine: the machine works normal.
7.3.2 Starting:
▪ Push in safety lock (3) and press On/Off switch (5) at the same time.
▪ Release safety lock (3).
7.3.3 Stopping:
▪ Release the On/Off switch (5).
7.4 Changing blades
Wear gloves when changing the blade.
