POWEG4500 EN
Copyright © 2020 VARO P a g e | 9 www.varo.com
9.1 Blade maintenance
Always clean the cutting blades after operation and lubricate with oil.
During longer cutting jobs, we recommend periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of the cutting blade.
Ensure that the blade is covered with the blade guard supplied when not in use.
9.2 Cleaning/ storage
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water,
solvents or polishes. Remove all debris, especially from the ventilation slots. Store the machine
in a secure dry place out of reach of children. Do not place other objects on top of the machine.
9.3 Service department
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
10 TECHNICAL DATA
12 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
13 STORAGE
▪ Ensure battery is removed before storage.
▪ Battery should be stored between 0 & 45 °C, incorrect storage could result in battery
damage.
