645078
8
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
POWX0650 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
9.1 Cleaning
The machine requires very little maintenance.
Ensure that the ventilation slots are not blocked and clean the machine regularly with a
soft cloth, clean the ventilation slots using compressed air.
Mains cables and carbon brushes may only be replaced by an authorized workshop or by
a similarly qualified person.
Remove the diamond cutting discs and clean the motor flange, the flange nut and the
protective guard after finishing work.
Carefully check the diamond cutting discs for signs of damage such as broken segments
etc.
Damaged cutting discs must be replaced immediately.
In the unlikely event of a breakdown, have the machine repaired by an authorized
workshop or by a similarly qualified person. Note the article number on the machines
rating when making enquiries or ordering replacement parts.
9.2 Checking and replacing the carbon brushes
For safety reasons, the machine automatically switches off if the carbon brushes are so
worn out that they no longer have contact with the motor. In that case, the carbon brushes
must be replaced by a pair similar carbon brush available through the after-sales service
organization or qualified professional person. Loosen the carbon brush cover (7) anti-
clockwise using a screwdriver, open the cap and remove the old carbon brushes (Fig. 9).
If they are 6 mm or less then they must both be replaced. Fit new carbon brushes and
replace the carbon brush cover (7).
After placing new carbon brushes, let the machine run with no load for 15 minutes.
CAUTION: The brushes must always be replaced in pairs. Always
disconnect the machine from the power supply before removing any
electrical covers.
10 TECHNICAL SPECIFICATIONS
Power supply
Rated power
Cutting depth
Cutting width
No load speed
Protection class
Diamond cutting disc diameter
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
95 dB(A)
Acoustic power level LwA
106 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Trilling):
Max. 3.4 m/s²
K = 1.5 m/s²
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX0650 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX0650

Powerplus POWX0650 Bedienungsanleitung - Deutsch - 12 seiten

Powerplus POWX0650 Bedienungsanleitung - Holländisch - 11 seiten

Powerplus POWX0650 Bedienungsanleitung - Französisch - 11 seiten

Powerplus POWX0650 Zusatzinformation - Alle Sprachen - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info