Bedienungsanleitung Powerplus POWX139 (Seite 4 von 8) (Englisch)

645093

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POWX139 EN

5.4 Power tool use and care

 Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

 Do not use the power tool if the switch cannot turn it on and off. A power tool with a

broken switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power

tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

 Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

 Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 MACHINE-SPECIFIC SAFETY WARNINGS

 Always hold the tool with it’s insulated grip.

 The operator should hold the tool with two hands firmly.

 Make sure the tool is switched on before you touch the workpiece with the sanding belt.

 Do not touch any rotating components of the tool.

 This machine is not waterproof, so do not add water at the surface of work piece.

 When it comes to sanding operations, it is necessary to ensure a well-ventilated work

area.

 Some of the material contained in the compounds may be toxic.

 Be sure to use the dust masks / respirators corresponding of the material being

processed.

7 ASSEMBLY

7.1 Installation of the powerfile arm (Fig 1, 2, 3 and 4)

1. Before the installation: place the power file on its side as shown below

2. Insert spring as shown

3. Fix the strut arm

4. Install the belt track adjustment knob

7.2 Installation and removal of belt (Fig 5)

 Make sure the machine is turned off and unplugged before installing or removing the belt.

 Pull the tension spanner to the back. Put the belt on the driving wheel and pull the belt to

the front of the arm, and then make the belt slip to the belt wheel before pulling the

tension spanner back to the forward position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX139 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX139

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info