Bedienungsanleitung Powerplus POWX139 (Seite 5 von 8) (Englisch)

645093

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POWX139 EN

7.3 Belt adjustment path ((Fig. 6)

 Check if the sanding belt is running centrally before starting the work.

 Run the file at no load speed and turn the centralizing knob either clockwise or anti-

clockwise to adjust the belt tracking until the sanding belt is running smooth.

7.4 Connect the dust bag (Fig. 7)

 This machine is fitted with a dust extraction outlet and a collection bag.

 We recommend using this facility is at all times, as well as using an approved face mask.

It will make you work cleaner.

 First place the extraction outlet, and then fit the dust collection bag onto the outlet.

8 OPERATION

8.1 Adjust the angle of the arm (Fig. 8)

 Before adjusting the angle of the arm, please make sure that the machine is turned off

and unplugged.

 The operator can adjust the arm in any angle according to the position or the shape of

work pieces, and then fix it into place.

 Loosen the angle adjustment lever, then you can lift up the arm. Rotate the arm along the

pivot to the desired position, then lock the angle adjustment lever and fix the arm into

place.

8.2 Switch operation (Fig. 9)

 The tool is operated by pressing/releasing the main switch. The machine will start by

pressing the main switch and stop when releasing the main switch.

 Press the lock button and the main switch at the same time to lock the swith into position

and the machine will work continuously.

 Press the main switch all the way to the end and then release it to unlock the machine

again.

8.3 Speed controller (Fig. 10)

 The speed can be adjusted between 300 m/min and 1700 m/min through rotating the

speed controller from 1 to 6.

 Adjusting the controller from 1 to 6 will accelerate.

 Adjusting the controller from 6 to 1 will slow down.

 Please choose the right speed according to the work piece.

8.4 Sanding operation (Fig. 11 and 12)

 Secure the work piece to prevent it from moving under the sander belt.

 When starting or stopping the machine, do not let the tool contact with the work piece.

Otherwise, it will result the damage of the sander belt or it will make the machine getting

out of control.

 When operating the machine, be careful to avoid any part of your body to come into

contact with any of the moving parts of the machine or belt.

 Hold the machine with both hands in front of you and away from you, and assume a

balanced posture.

 Press the main switch and allow the motor to reach full speed. Hold the machine parallel

to the work piece. Gently bring the belt in contact with the work piece. Do not force tool.

The weight of the sander supplies adequate pressure. Applying additional pressure will

slow down the motor, rapidly wear out the sanding belt and reduce the sanding speed a

lot.

 Avoid contact with the sanding belt at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX139 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX139

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info