587578
6
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Operation
Infrared remote control
The infrared remote control sends
the programmed settings over
a distance of up to 6 m to the
receiver of the indoor unit. Data
will only be received correctly
if the remote control is pointed
at the receiver and no objects
obstruct the transmission path.
First insert the batteries supplied
on delivery (2 x type AAA) into
the remote control. To do so,
pull off the flap of the battery
compartment and insert the
batteries according to their
polarization (see marks).
The indoor unit is easily operated using the standard infrared remote control. The indoor unit beeps to
acknowledge the correct transmission of data. If it is not possible to program the indoor unit using the remote
control, it can also be manually operated.
Faults are indicated
by codes (see chapter
Troubleshooting and
customer service).
NOTE
Replace discharged batteries
immediately with a new set in
order to avoid risk of leakage.
It is recommended that the
batteries are removed if the
equipment is shut down for
longer periods.
NOTE
Display on indoor unit
The display illuminates according to the settings. In operation, the display
lights up, the selected mode and the nominal temperature are shown.
Manual operation
The indoor unit can also be started
manually. To do so, press the
button on the right side of the unit
to activate the automatic mode.
In manual operation, the following
settings apply:
Automatic operation:
Above 21°C = cooling operation,
set temperature 24°C
under 21°C = heater operation,
set temperature 24°C
Fan speed AUTO
Press the button on the infra-red
remote control to interrupt manual
operation.
max. 6 m
1 max. distance 6 m
Display on indoor unit
Power
Unit turned on
Air circulation
mode set
Timer operation
Fan speed
Stage 1, 2 and 3 and
Auto (blinking)
Display
Display of
coded error
messages, room
and nominal
temperature
C
TURBO
SET
Ion generator
switched on
REMKO ATY
6
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO ATY261 DC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO ATY261 DC

REMKO ATY261 DC Bedienungsanleitung - Deutsch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info