587578
7
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
"MIN."button
This button increases the
minute value for time and timer
programming.
"CLOCK"button(recessed)
By pressing this button, the
time setting is activated.
"ION" button
By pressing this button, the ion
generator and turbo mode are
activated.
"TIMER OFF" button
This button serves to program
the automatic switch-off time
for the unit within the next 24
hours.
"RESET" button
(recessed)
This button resets the remote
control to its factory default
configuration.
3. Heating mode In this mode,
the warm air in the room
is warmed to the desired
temperature.
4
. Air circulation mode
In this mode, the air in the room
is recirculated.
5
. Dehumidification mode
In this mode the room is mainly
dehumidified and the adjusted
temperature is maintained.
"FAN" button
Press this button to set the
desired fan speed. 4 speeds
are available: Automatic, high,
medium and low fan speed.
"(SLEEP)" button
After pressing this button,
the Sleep mode is activated
and in cooling operation, the
nominal temperature increases
automatically by 1 °C within
an hour, in heating operation,
the nominal temperature is
lowered by 1 °C within an
hour. After the second hour,
the temperature is increased/
lowered by 2°C. After 6 hours,
the function is switched off.
"(SWING)"button
This button directly activates
the oscillating function of the
fins for better air distribution
in the room.
"TIMER ON"button
This button is used to
activate the automatic on and/
or off time of the unit and
is programmed with buttons
and at intervals of 10
minutes.
"HR"button
This button increases the
hour value for time and timer
programming.
Buttons on the remote control
Buttons on the remote control
"ON/OFF" Button
Press this button
to start the unit.
"  "button
This button is used to set
the desired temperature
between 18°C and 30°C.
"MODE"button
Use this button to select the
operating mode. The indoor unit
has 5 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
2. Cooling mode
In this mode the cold air in the
room is cooled to the desired
temperature.
7
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für REMKO ATY261 DC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von REMKO ATY261 DC

REMKO ATY261 DC Bedienungsanleitung - Deutsch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info