642693

Renkforce AOK-2805 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Individual parts and controls
(1) Time indicator
(2) DST symbol
(3) SNOOZE/LIGHT button
(4) DCF symbol
(5) Alarm symbol
(6) Temperature indicator
(7) Calendar indicator
(8) Battery warning
(9) Indicator for the day of the week
(10) MODE button
(11) ALARM button
(12) + button
(13) - button
(14) WAVE button
(15) Battery compartment
(16) RESET button
Inserting/replacing batteries/rechargeable batteries
• Open the battery compartment (15) and insert two new batteries of type AAA/Mignon observing
the correct polarity.
• The correct polarity is indicated in the battery compartment.
• Close the battery compartment.
• After inserting the batteries, the DCF symbol (4) in the display starts flashing.
• The radio-controlled alarm clock now attempts to receive a DCF signal (see also the chapter
“DCF reception”).
• You should change the batteries, when the battery warning (8) is shown in the display.
Use of rechargeable batteries is possible. However, due to lower operating voltage
(rechargeable battery = 1.2 V, battery 1.5 V) and lower capacity the operating time will
be less.
If no sensible information is shown in the display, please press the RESET (16) with a
pointed object (e.g., with a bent paper clip) to activate the reset function. In doing so,
the internal processor is reset and returns to normal operation.
DCF reception
• After the batteries have been inserted, the clock searches automatically for the DCF signal. This
is indicated by a flashing DCF symbol (4) on the display.
• The synchronisation process is usually completed 3-10 minutes.
• As soon as the DCF signal is decoded, a steady lit DCF symbol (4) appears and the time indica-
tor (1) displays the current time.
• During summer months, the icon for daylight saving hours (2) is shown.
The detection of the DCF signal and its analysis lasts a few minutes. Do not move the
radio-controlled alarm clock during this time. Do not press any buttons or switches!
The DCF signal search is aborted manually by pressing the WAVE (14) button.
Poor DCF reception can occur, for example, due to metallised insulated glass, rein-
forced concrete buildings, coated special wallpapers, proximity to electronic devices
or in cellars.
If the current time is not displayed after 10 minutes, change the position of the radio-
controlled alarm clock and restart DCF reception by pressing the button WAVE (14).
The attempts for receiving the signal for the daily automatic synchronisation with the DCF time are
carried out several times per day. One successful reception per day is sufficient to keep the devi-
ation to less than one second.
The DCF signal is transmitted via a DCF transmitter in Main-
flingen (near Frankfurt am Main). Its range covers up to
1500 km and, and under ideal reception conditions, even up
to 2000 km.
Among other things, the DCF signal includes the precise time
(theoretically, a deviation of one second in a million years!)
and the date.
Naturally, this also eliminates the hassle of manually setting
up summer and winter times.
G
Operating instructions
Radio-controlled alarm clock
with temperature
Item no. 1341235
Intended use
This product is intended to display the time and date. It also includes an alarm function and a
thermometer. The time is set automatically using an integrated DCF receiver.
Any use other than that described above could lead to this product being damaged and involves
the risk of short-circuiting, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All names of com-
panies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Radio alarm clock
• Operating instructions
Explanation of symbols
This symbol indicates specific risks associated with handling, function and use.
The “arrow” symbol points to special tips and operating information.
Safety instructions
First, read the complete operating instructions carefully, as they contain important
information about the proper operation.
Damage due to not following these operating instructions will void the warranty! We
do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions! In such cases, the warranty will
be null and void!
• For safety reasons, any unauthorised conversion and/or modification to the product
is not permitted.
• Do not expose the product to high temperatures, strong vibrations or heavy mecha-
nical loads.
• If you have any doubts about the correct operation, or the safety of the product,
please consult a specialist.
• This product is not a toy and must be kept out of the reach of children. Only use the
product out of the reach of children; the product contains parts and batteries that
can be swallowed.
• Do not leave packaging materials unattended. It may become a dangerous plaything
for children.
• Handle the product with care; it can be damaged by impact, blows, or accidental
drops, even from a low height.
• Also observe any further safety instructions in the individual chapters of these ope-
rating instructions.
Notes on primary and secondary batteries
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not leave batteries/rechargeable batteries lying around; there is a risk that they
could be swallowed by children or pets. If they are swallowed, consult a doctor im-
mediately.
• Leaking or damaged single use/rechargeable batteries that come in contact with the
skin can cause acid burns; therefore, use suitable safety gloves.
• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into
fire. There is a risk of explosion!
• Do not recharge conventional non-rechargeable batteries; risk of explosion! Only
recharge rechargeable batteries that are intended for this purpose; use a suitable
battery charger.
• Check that the polarity is correct when inserting the batteries/rechargeable batte-
ries (pay attention to plus and minus signs).
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Renkforce AOK-2805 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info