642693

Renkforce AOK-2805 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
Manual settings
Manual setting of the time and date is only necessary when the radio-controlled alarm
clock is used outside of DCF reception range, when a different time zone other than
Germany is desired, or when the DCF reception is disrupted due to environmental con-
ditions.
Holding down button - (13) or button + (12) when configuring, the setting is made faster.
If in setting mode no key is pressed for approximately 30 seconds, the setting mode is
automatically aborted.
• Press the MODE (10) button for approximately 3 seconds until the digits of the hour start flashing
to access the setting mode.
• Set the value by pressing the button - (13) or the button + (12).
• Press the MODE button (10) briefly to save the value and proceed to the next value that needs to
be set.
• The values are adjusted in the following order:
Year, month, date
Language for weekday indicator
GE = German NE = Dutch
EN = English SP = Spanish
IT = Italian DE = Danish
FR = French
Time zone
The time zone can be adjusted towards the DCF time zone in the range of +/-12 hours.
The symbol TZ (= Time Zone) appears on the display.
Hours, minutes
• Press the MODE button (10) to save the settings and return to the normal time display.
Alarm function
Setting the Alarm
• Press and hold the ALARM button (11) for about 3 seconds, until the digits of alarm 1 is flashing.
• Set the time with the + button (13) or the - button (12).
• Press the ALARM button (11) briefly and set the minutes of alarm 1 with the + button (13) or
the - button (12).
• Press the ALARM button (11) briefly and set the hours of alarm 2 with the + button (13) or
the - button (12).
• Press the ALARM button (11) briefly and set the minutes of alarm 2 with the + button (13) or
the - button (12).
• Press the ALARM button (11) again to save the setting.
Display/activate/deactivate the alarm
• Press the ALARM button (11) to display alarm 1.
• Press the ALARM button (11) to display alarm 2.
• When the desired alarm is shown press button + (12) to activate or deactivate the alarm func-
tion.
• The alarm icon (5) shown on the display indicates that the alarm function is activated .
Stopping the alarm signal
•
When the alarm goes off, press any key with the exception of the button SNOOZE/LIGHT
(3), to turn
off the alarm signal for the next 24 hours.
• If no button is pressed the alarm will turn off after approx. 2 minutes automatically.
Snooze Function
• When the alarm signal sounds, press the SNOOZE/LIGHT button (3) to activate the snooze func-
tion.
• After pausing for about 5 minutes the alarm signal will sound again.
• During this pausing time “SNZ 1“, or “SNZ 2“ is flashing on the display above the corresponding
alarm icon (5).
Display Light
• The display light can be activated by pressing the SNOOZE/LIGHT button (3).
• The backlit display turns off automatically after about five seconds.
Thermometer
• The temperature indicator (6) shows the room temperature.
• Press the key (13) to toggle between the temperature units °C or °F.
Time display format
• Press button + (12) to select the desired time format (12 h or 24 h format).
Troubleshooting
By purchasing this radio-controlled alarm clock, you have acquired a product that has been de-
signed with state of the art quality and is operationally reliable. Nevertheless, problems or faults
may occur.
Therefore, we would like to describe here how to eliminate possible faults.
The clock does not synchronise or has only temporary reception:
• The distance to the DCF transmitter is too great or restricted by geographical conditions.
• Relocate the product; switch off interfering devices such as TV sets, computers or microwave
ovens.
• Avoid a location in the vicinity of large metal surfaces, which may shield the radio signals. Win-
dows with a vapour deposited metal layer can also influence the signal reception.
• Place the clock near a window for synchronisation, and align the front or back side in the direc-
tion of Frankfurt (Germany).
• Leave the clock switched on overnight to reduce atmospheric interference.
The display shows confused symbols or nothing is displayed at all:
• Press the RESET button (16) with a sharp object (e.g. a straightened paper clip). The built-in
microprocessor is reset and the clock goes back into DCF reception mode.
Maintenance and cleaning
The product does not require any maintenance and should never be disassembled for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use aggressive detergents as these can cause discolouration of the case.
Do not press on the sensitive display surface.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Remove the batteries that may be inserted and dispose of them separately from the
product.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries. Do not
dispose of used batteries in the household waste!
Batteries/rechargeable batteries containing hazardous substances are labelled with
the symbol shown to indicate that disposal in household waste is forbidden. The sym-
bols of the critical heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking can
be seen on the battery / rechargeable battery, e.g., underneath the refuse bin symbol
shown on the left).
You can return used (rechargeable) batteries free of charge at the official collection
points in your municipality, our stores, or where ever (rechargeable) batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage.........................................3 V/DC
Batteries ........................................................2 x 1.5 V micro-cell (AAA)
Battery lifespan ............................................approx. 1 year
Time protocol ................................................DCF77
Alarm time .....................................................2 minutes
Snooze function............................................5 minutes
Measuring range thermometer .................0 °C to +50 °C
Dimensions....................................................100 x 77 x 33 mm
Weight ............................................................112 g
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that this
product adheres to the fundamental requirements and the other relevant regulations of Directive
1999/5/EC.
The Declaration of Conformity for this product is available at www.conrad.com
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Renkforce AOK-2805 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info