Bedienungsanleitung Rexon RL-328S (Seite 10 von 14) (Englisch)

490426

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Page 7

Delete A Nuisance Channel

Allows you remove temporarily the channels which you don’t want to hear from the scan list.

During scanning, when the radio is locked onto a busy channel, press button to remove this

channel from the scan list, and it won’t be scanned until the radio is turned on again.This func-

tion should not be used in systems critical or mission critical communication systems and can be

disabled by your dealer.

Menu Setting

By locking button without user’s access(dealer programmable) in the programming software,

the following settings cannot changed by end user.

Your dealer is able to setup following menu is available or not available by pc

programmer.

Squelch Level

Press button continuously until LCD shows [SQUL-3], and then press or button to

increase or decrease squelch level from 0 to 10: 0 means squelch canceling; 10 means tight

squelch.

Setting the radio to the tight squelch level, you can avoid unwanted signals or noise, but you may

not receive a weak signal. So, it will be better for you to select the normal squelch level (default

value: 3). Press button to save the setting and to get back to operation menu or press

again to gain access to other settings.

VOX Sensitivity Level

VOX feature can be programmed at per channel. If this channel is set with vox feature, icon

will ash. Press button continuously until LCD shows [VXL:3]. Press or button to adjust

VOX sensitivity from 0 to 10. 0 means VOX canceling; 1 means the most sensitive (for quiet en-

vironment); 5 means the least (for noisy environment). Press button to save the setting and

get back to operation menu or press button again to gain access to other settings.

BEEP

Press button continuously until LCD shows [BEEP-On]. Press or button to choose

turning beep On or OFF. Press button to save the setting and get back to operation menu or

press again to gain access to other settings.

TX Power Selection

Press button continuously until LCD shows [PWR-H]. Press or to choose TX output

power. H means high power; L means low power. Press button to save the setting and get

back to operation menu or press button again to gain access to other settings.

Keypad Lock

There are two kinds of keypad lock/unlock functions: with users access or without users access.

Your dealer can set either key of the front ve buttons to be locked permanently without users

access, or to be temporarily unlocked with users access. Locking the key pad correctly is very

important to ensure that the RL-328S works at its best for the end user, time should be taken to

ensure that the various levels of key pad lock are fully understood.

Press button continuously until LCD shows [KEY.L:OFF] . Press or button to choose

keypad lock: “OFF” means unlock; “On” means lock. When keypad is locked, LCD shows and

only keys on left side is still working. Press button to save the setting and get back to opera-

tion menu or press button again to gain access to other settings.



•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rexon RL-328S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info