Bedienungsanleitung Ricoh RDC-I 500 (Seite 3 von 26) (Englisch)

104114

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

129

Appendix

Flash will not

fire or will not

charge

Autofocus is on

but camera not

focusing

Problem

Image dark

even with flash

Image is too

dark

Unnatural

coloration of

image

Date and other

recording data

not displayed

Playback is not

clear

Cause

Dirty lens or AF viewfinder

Subject not in center of shooting

scope

Subject difficult to focus on

Distance to subject is too close

Recording mode set on

(Voice

Memo) or

(Motion Picture)

Flash mode set on

(flash off)

Camera set on macro mode

White balance set to mode other

than auto

Battery exhausted

Distance to subject more than

approx. 2.5 m

Subject is too close

Overexposed

LCD brightness setting not correctly

adjusted

Shot in low light with flash set to

(flash off)

Underexposed

LCD brightness setting not correctly

adjusted

Shooting conditions difficult for auto

white balance mode

Screen display set to [No display]

Camera not set to

(Play) mode

Incorrect playback source

Card not inserted, or inserted card

does not contain any files

Card not formatted with this camera

Card contains incorrectly recorded

files

Card contains files in format not

supported by this camera

AV interface cable not properly

connected

Source of interference, such as

electric motor, nearby

Card contact surface dirty

Error in internal memory of camera

Error in card

Remedy

Clean lens or viewfinder.

Use focus lock.

Use focus lock or switch to manual focus.

Set macro mode.

Set mode dial to

(Still Picture) or

(Text) mode.

Press

button to cancel flash off mode.

Press

button to cancel macro mode.

Press WB button to switch white balance to

auto mode.

Charge battery.

Move closer to subject.

Set flash to flash off mode.

Adjust exposure compensation from

recording menu. Set time exposure mode

to OFF.

Press DISPLAY button 2 seconds or more

and adjust with

· buttons.

Press

button to cancel flash off mode.

Press

button to adjust exposure

compensation.

Press DISPLAY button 2 seconds or more

and adjust with

· buttons.

Place a white object near subject, use

flash, or select manual white balance

mode.

Press DISPLAY button to switch display

mode.

Set mode dial to

(Play).

Press

button to change playback

source. Switch to another folder containing

files.

Insert card containing recorded images.

Use card that has been formatted and

recorded with this camera.

Insert card containing properly recorded

images.

Check format type.

Connect properly.

Move camera away from source of

interference.

Clean with soft, dry cloth.

Copy required files from internal memory

onto card and format internal memory.

Test camera with another card. If second

card displays well, problem is with card not

camera. Do not use this card.

Page

–

P.49

P.64

P.63

P.47

P.50

P.55

P.63

P.59

P.15

P.63

P.55

P.58

P.77

P.37

P.55

P.58

P.37

P.59

P.41

P.85

P.82

P.43

P.82

P.20

P.35

P.20

P.82

P.86

–

P.35

P.88

–

Image is too

bright

No playback or

image will not

appear

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ricoh RDC-I 500 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ricoh RDC-I 500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info