Bedienungsanleitung Roland BK-9 - Midi Implementation (Seite 5 von 26) (Englisch)

708968

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

MIDI Implementation

Program Change message was received will not be aected.

z Channel Pressure

Status 2nd byte

DnH vvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Channel Pressure : 00H-7FH (0-127)

• Not received when “Caf” RX Event is O.

• Not received when MIDI “Rx” part parameters is “O”.

• The resulting eect is determined by System Exclusive messages. With

the initial settings there will be no eect.

z Pitch Bend Change

Status 2nd byte 3rd byte

EnH llH mmH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH

(-8192 - 0 - +8191)

• Not received when “Pitch Bender ” RX Event is O. (Initial value is ON)

• Not received when MIDI “Rx” part parameters is “O”.

• The resulting eect is determined by System Exclusive messages. With

the initial settings the eect is Pitch Bend.

 Channel Mode Messages

z All Sounds O (Controller number 120)

Status 2nd byte 3rd byte

BnH 78H 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• When this message is received, all currently-sounding notes on the

corresponding channel will be turned o immediately.

z Reset All Controllers (Controller Number 121)

Status 2nd byte 3rd byte

BnH 79H 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• When this message is received, the following controllers will be set to

their reset values.

Controller Reset value

Pitch Bend Change ±0 (Center)

Polyphonic Key Pressure 0 (o)

Channel Pressure 0 (o )

Modulation 0 (o)

Expression 127 (max)

Hold 1 0 (o)

Portamento 0 (o)

Sostenuto 0 (o)

Soft 0 (o)

RPN unset; previously set data will not change

NRPN unset; previously set data will not change

z All Notes O (Controller Number 123)

Status 2nd byte 3rd byte

BnH 7BH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• When All Notes O is received, all notes on the corresponding channel

will be turned o. However if Hold 1 or Sostenuto is ON, the sound will

be continued until these are turned o.

z OMNI OFF (Controller Number 124)

Status 2nd byte 3rd byte

BnH 7CH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• The same processing will be carried out as when All Notes O is received.

z OMNI ON (Controller Number 125)

Status 2nd byte 3rd byte

BnH 7DH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• OMNI ON is only recognized as “All notes o”; the Mode doesn’t change

(OMNI OFF remains).

z MONO (Controller Number 126)

Status 2nd byte 3rd byte

BnH 7EH mmH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm = mono number : 00H-10H (0-16)

• The same processing will be carried out as when All Sounds O and All

Notes O is received, and the corresponding channel will be set to Mode

4 (M = 1) regardless of the value of “mono number.”

z POLY (Controller Number 127)

Status 2nd byte 3rd byte

BnH 7FH 00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

• The same processing will be carried out as when All Sounds O and All

Notes O is received, and the corresponding channel will be set to Mode

 System Realtime Message

z Active Sensing

Status

FEH

• When Active Sensing is received, the unit will begin monitoring the

intervals of all further messages. While monitoring, if the interval

between messages exceeds 420 ms, the same processing will be carried

out as when All Sounds O, All Notes O and Reset All Controllers are

received, and message interval monitoring will be halted

z Timing Clock

Status

F8H

• STYLE: Received when Sync RX is On and the Sync Mode Style RX

parameter (MIDI\Edit\System) is set to AUTO or MIDI.

• SONG: Received when Sync RX is On and the Sync Mode Song RX

parameter (MIDI\Edit\System) is set to AUTO or MIDI.

• When “Timing Clock” message is received, the Style or Song is

synchronized to an external clock according to the following table. Song/

Style Sync RX Response

Internal A Style/Song will neither start/stop nor follow the tempo

of the external Timing Clock (F8) and “Start /Stop” (FA/FC)

messages.

Auto If a Style/Song receives MIDI “Start/Stop” (FA/FC), it will

follow Internal or External clock, depending on whether

“MIDI Clock” (F8) messages are received.

MIDI If a Style/Song receives MIDI “Start/Stop” (FA/FC) it will

follow External “MIDI Clock” (F8) messages and herefore

wait until they are received.

Remote If a Style/Song receives MIDI “Start/Stop” (FA/FC) it will

follow only Internal tempo and thus ignore incoming “MIDI

Clock” (F8) messages

z Start

Status

FAH

• STYLE: Received when Sync RX is On and the Sync Mode Style RX

parameter (MENU->MIDI->Edit System) is set to AUTO, MIDI or REMOTE.

• SONG: Received when Sync RX is On and the Sync Mode Song RX

parameter (MENU->MIDI->Edit System) is set to AUTO, MIDI or REMOTE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 - Midi Implementation Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info