714021
17
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Chart: Performance data (reference values) and max. operating time
The maximum allowed connection power of the hob is 3200 W.
The indicated values are reference values and are valid or ferromagnetic standard wok pots with a diameter
of 30 cm.
6. Error codes
The electronic control is equipped with many internal monitoring functions. If there is a general error, the
whole control will be switched off and an error code will appear in the display.
As long as the error is not remedied the cooktop cannot be switched on again!
6.1. General errors
Self-help is normally not possible in the event of general errors the appliance has
to be forwarded to the customer service in any case.
Indication Description
U400 Internal connection error
ErXX General internal error of the electronic control
6.2. Errors relating to the cooking zone
Provided that the self-help described does not work out or is
not practicable, the appliance has to be forwarded to the customer service.
Indication Description
E2 The temperature on the cooktop exceeds the allowed maximum value e. g. due to an empty pot
or another metal object when the appliance is switched on (see also temperature control).
Self-help: Eliminate the cause of overheating. After the cooking surface has cooled down, the
cooking zone can be put into operation again. If applicable, improve the air circulation of the
built-in hob by constructional measurements e. g. ventilation slots etc.
E4 Communication error between the cooking zone control and its superior control
Self-help: Not possible the appliance has to be forwarded to the customer service.
E5 Error relating to the control unit
Self-help: Not possible the appliance has to be forwarded to the customer service.
E6 Error relating to the voltage supply of the control
Self-help:
Make sure the appliance is connected to the mains voltage indicated on the rating
label.
E7 Unidentified error relating to the control
Self-help: Not possible the appliance has to be forwarded to the customer service.
E9
Error relating to the tem
perature sensor
of the control
Self-help: Not possible the appliance has to be forwarded to the customer service.
Level
Power
in %
(approx.)
Power
in watt
(approx.)
Operating time
limitation
in min.
1 3 70 520
2 5 120 402
3 8 190 318
4 12 290 260
5 18 430 212
6 28 670 170
7 42 1010 139
8 64 1540 113
9 100 2400 90
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rommelsbacher EBW3208IN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info