Bedienungsanleitung Rotel rcd 1072 (Seite 7 von 10) (Englisch)

161721

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

English

Disc Drawer

A motor-driven disc drawer, located in the

center of the RCD-1072, slides out to accept

a compact disc and retracts to play the disc.

Place the compact disc in the drawer label-

side up. Make sure the disc is properly cen-

tered in the tray. The drawer can be closed

in two ways: pushing the OPN/CLS button or

pushing the PLAY button.

Transport Control Buttons

These buttons provide basic control functions

for the disc transport mechanism. Except where

noted, all functions are available on the

RCD-1072 front panel and the IR remote con-

trol.

OPEN/CLOSE Button

When the transport disc drawer is closed,

pressing this button automatically opens the

drawer. To close the drawer, press this button

again. The drawer can also be closed by press-

ing the PLAY button

When the drawer is open, the Display will read

“OPEN”. When it is closed with no disc, the

display will read “NO DISC”. When the drawer

closes with a disc inserted, the Display will

indicate the number of tracks on the disc and

the total time of the disc in minutes and sec-

onds.

PLAY Button

Press the PLAY button to start playing the disc.

If the disc drawer is open, it will close auto-

matically. The number of the track being played

and the elapsed time will be shown in the

display, along with the PLAY indicator. Nor-

mally, the disc will start playing with the first

track. However, you can select a different track

using the TRACK buttons or the DIRECT AC-

CESS buttons (see below) before pressing the

PLAY button to start playing a different selec-

tion.

STOP Button

This button stops a disc that is playing and

resets the player, i.e. if play is resumed, the

disc will start over from the first track. Press-

ing the STOP button twice quickly in succes-

sion cancels any programmed selections (see

below).

PAUSE Button

This button is used to temporarily suspend play.

The disc continues to spin and play will be

resumed from the current position. The PAUSE

indicator will light in the Display. To resume

playing the disc, press the PAUSE button again

or press the PLAY button.

TRACK Buttons

These buttons are used to select tracks on the

disc. When a disc is playing, pressing the right

TRACK button advances to the beginning of

the next track. Pressing the left TRACK but-

ton returns to the beginning of the current track.

Pressing twice quickly in succession returns to

the beginning of the previous track. The new

track number appears in the Display.

These buttons are also used to select a track

before pressing the PLAY button or when

memorizing tracks for the PROGRAM play

mode (see below). These selections are made

by continuously pressing the TRACK buttons

until the desired track is reached.

In PROGRAM mode, the TRACK buttons ad-

vance or reverse to the next track in the memo-

rized selection list.

DIRECT ACCESS Buttons

(remote only)

These eleven numeric buttons (labeled 1

through 10 and >10) are used to directly ac-

cess a track from the IR remote control instead

of stepping through the tracks using the TRACK

buttons.

The first ten tracks on a disc can be selected

by pressing the corresponding button. For

example, to play the third track, press the 3

button on the remote control.

When accessing track numbers greater than

10, press the >10 button followed by the track

number. For example, to select track 12, press

the >10 button followed by the 1 button and

then the 2 button. The number of the selected

track will appear in the main numeric area

at the center of the Display.

There is also a four by four matrix of track

numbers (1 – 16) located at the right side of

the display. This display indicates all of the

tracks on the disc. If there are more than 16

tracks on the disc, all of the digits will light

accompanied by the word OVER, regardless

of which track is playing. This matrix is inde-

pendent of the main numeric area of the Dis-

play, which will always indicate the currently

playing track, even if above 16.

The DIRECT ACCESS buttons may also be used

to memorize tracks in PROGRAM mode (see

PROGRAM Button section).

SEARCH Buttons

These buttons fast forward or fast reverse

through the currently playing disc as long as

they are pressed. While the buttons are

pressed, you will hear high-speed audio.

Releasing the buttons returns to PLAY mode.

Additional Features

These convenience features add extra func-

tionality to the RCD-1072, including the ability

to play high-definition HDCD discs, to memo-

rize a group of tracks to be played, to repeat

a disc, program, or track over and over, to

play the tracks on a disc in random order, to

automatically play the first 10 seconds of each

track, and to select from several available time

displays.

HDCD

is an encoding technique that allows

a CD to have greater effective dynamic range,

reduced distortion, and increased detail. When

playing HDCD encoded discs, the RCD-1072

can reproduce as much as 18-bit dynamic

range. HDCD discs are indentified by an HDCD

logo on the package.

No user action is required to play an HDCD

recording. The CD player automatically senses

HDCD encoding and enables the circuitry. The

HDCD LED on the front panel will light to in-

dicate that an HDCD disc is being played.

NOTE: Some CDs that are labeled as

HDCD have some tracks that are HDCD en-

coded and others that are not. The indica-

tor light will light only when playing

encoded tracks. This does not indicate a

problem with the unit.

Rotel rcd 1072 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info