Bedienungsanleitung Ryobi cid 1802 m one (Seite 9 von 81) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389088

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

RULES FOR SAFE OPERATION

■ If under abusive conditions, liquid is ejected from

the battery, avoid contact. If this accidentally

occurs, flush with water. If liquid contacts eyes

additionally, seek medical help.

■ Do not place battery tools or their batteries near

fire or heat. This will reduce the risk of explosion and

possibly injury.

WARNING

Batteries vent hydrogen gas and can explode in

the presence of a source of ignition, such as a

pilot light. To reduce the risk of serious personal

injury, never use any cordless product in the

presence of open flame. An exploded battery can

propel debris and chemicals. If exposed, flush

with water immediately.

SPECIFICATIONS

Model CID-1802M

Voltage 18 V

Chuck 10 mm

Switch Variable speed

No load speed (drill mode):

- Lo speed 0 - 400 min-

- Hi speed 0 - 1400 min-

No load speed (impact mode):

- Lo speed 0 - 6400 min-

- Hi speed 0 - 22400 min-

Max. Torque 32 Nm

Weight - incl. battery pack 2.17 kg

Battery pack (Not included)

- 1.5/1.7 Ah BPP-1817M/1815M

Charger (Not included) BC-1800/BC-1815S

FEATURES

1. Keyless chuck

2. Switch trigger

3. Direction of rotation selector (Forward/Reverse)

7. Screwdriver bits

5. Battery pack (Not included)

6. Latches

7. Torque adjusting Ring

OPERATION

TO INSTALL BATTERY PACK (NOT INCLUDED)

■ Lock switch trigger on your drill by placing the

direction of rotation selector in center position.

See Figure 4.

■ Place battery pack in your drill. Align raised rib on

battery pack with groove inside drill. See Figure 2.

■ Make sure the latches on battery pack snap in place

and battery pack is secured in drill before beginning

operation.

TO REMOVE BATTERY PACK (NOT INCLUDED)

■ Lock switch trigger on your drill by placing the

direction of rotation selector in center position.

See Figure 4.

■ Locate latches of battery pack and depress to release

battery pack from your drill. See Figure 2.

■ Remove battery pack from your drill.

ADJUSTING THE TORQUE

See Figure 3.

The tool is equipped with an adjustable torque clutch for

driving different types of screws into different materials.

Adjust the torque as necessary.

We recommend that you use carbide-tipped bits and

select impact mode when drilling in hard material such

as brick, tile, concrete, etc.

CAUTION

The impact drill is not designed for reverse

hammering. Failure to obey this caution may

result in property damage.

SWITCH

See Figure 4.

■ To turn your drill ON, depress the switch trigger.

■ To turn it OFF, release the switch trigger.

VARIABLE SPEED

This tool has a variable speed switch that delivers

higher speed and torque with increased trigger pressure.

Speed is controlled by the amount of switch trigger

depression.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

CID-1802M 8/06/05 14:13 Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi cid 1802 m one Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info