Bedienungsanleitung Ryobi cid 1802 m one (Seite 10 von 81) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389088

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

OPERATION

SWITCH LOCK

See Figure 4.

The switch trigger can be locked in the OFF position.

This feature can be used to prevent the possibility of

accidental starting when not in use. To lock switch trigger,

place the direction of rotation selector (Forward/Reverse

Selector) in center position.

Note: When selector is in center position, switch trigger

is locked.

REVERSIBLE

See Figure 6.

This tool has the feature of being reversible. The direction

of rotation is controlled by a selector located above the

switch trigger. With the drill held in normal operating

position, the direction of rotation selector should be

positioned to the left of the switch for drilling. The drilling

direction is reversed when the selector is to the right of

the switch. When the selector is in center position,

the switch trigger is locked. To stop, release switch trigger

and allow the chuck to come to a complete stop.

ELECTRIC BRAKE

This drill has an electric brake. When the trigger switch is

released, the chuck stops turning. When the brake is

functioning properly, sparks will be visible through the

vent slots on the housing. This is normal and is the action

of the brake.

ADJUSTING THE SPEED

See Figure 6.

Follow these steps to adjust the speed.

■ For high speed: Slide the two-speed gear train switch

to “2.”

■ For low speed: Slide the two-speed gear train switch

to "1."

Note: If you have difficulty changing from one gear

range to the other, turn the chuck by hand until the

gears engage.

CAUTION

To prevent gear damage, always allow chuck to

come to a complete stop before changing the

speed or the direction of rotation.

KEYLESS CHUCK

See Figure 5.

Your drill has a keyless chuck. As the name implies,

you can hand tighten or release drill bits in the

chuck jaws. Rotate the chuck with your hand. Rotate the

chuck body with your other hand. The arrows on the

chuck indicate which direction to rotate the chuck body in

order to LOCK (tighten) or UNLOCK (release) the drill bit.

WARNING

Do not hold chuck body with one hand and use

power of the drill to tighten chuck jaws on drill bit.

Chuck body could slip in your hand or your hand

could slip and come in contact with rotating drill bit.

This could cause an accident resulting in serious

personal injury.

MAINTENANCE

WARNING

When servicing, use only identical replacement

parts. Use of any other part may create a hazard

or cause product damage.

Avoid using solvents when cleaning plastic parts.

Most plastics are susceptible to damage from various

types of commercial solvents and may be damaged by

their use. Use clean cloths to remove dirt, dust, oil,

grease, etc.

WARNING

Do not at any time let brake fluids, gasoline,

petroleum-based products, penetrating oils, etc.

come in contact with plastic parts. They contain

chemicals that can damage, weaken or

destroy plastic.

Do not abuse power tools. Abusive practices can

damage tool as well as workpiece.

WARNING

Do not attempt to modify this tool or create

accessories not recommended for use with

this tool. Any such alteration or modification is

misuse and could result in a hazardous condition

leading to possible serious personal injury.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

CID-1802M 8/06/05 14:13 Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi cid 1802 m one Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info