521730
66
Zoom out
Zoom in
Vorherige Seite
1/103
Nächste Seite
Operation
5-11
Operation Settings Quick usageDirectoryMaintenanceSafety ContentsInstallation
Date en cours : 22 mai 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261430-5 36xx Sagem GB\Utilisation.fm
Setting parameters for for the scanner(s)
1
.
Each of the two scanners may be set separately.
RESOLUTION to set the photocopy resolution,
ZOOM and ORIGIN settings to reduce or magnify any portion of a document by choosing the
origin and value of the zoom to apply to that portion.
CONTRAST to choose the photocopy contrast.
BRIGHTNESS is used to make your original document lighter or darker.
L/R MARGINS to shift the margins of your original document to the left or to the right.
Setting parameters for the printer.
BRIGHTNESS is used to choose the copy quality on the printer.
PAPER is used to tell your machine what type of paper you use by default.
TRAY is used to tell your machine which paper tray shoud be used by default.
L/R MARGINS to shift the margins of your document to the left or to the right.
Caution - All the settings performed through this menu will become the machine's default
settings.
To access to the settings
M
ENU : 87 - ADVANCED FUNCTIONS / SCAN. AND PRINT.
+ Select the scanner (CIS SCANNER for the sheet-feed scanner, CCD SCANNER
2
for the flat-bed
scanner) or the
PRINTER to be set and pres Ok to confirm.
+ use keys 5 or 6 of the navigator to scroll the described hereafter settings you want to
modify.
6FDQQHUVHWWLQJV
5HVROXWLRQ
+
Set the desired resolution FAST, QUALITY or PHOTO with keys 3 or 4.
+ Validate your setting by pressing key OK.
=RRPDQG2ULJLQ
Your fax offers you to reduce or magnify a determined part of a document by 25 to 400 %.
+ Enter the desired zoom value with the numeric keypad (ZOOMING).
+ Validate your setting by pressing key OK.
If you wish, you can change the origin of the flat-bed scanner (by default, this is the front left
angle of the scanner window marked with two arrows
3
)
By entering new values of X and Y given in mm (X < 210 and Y < 297), you will move the
scanned zone as shown on the figure below
1. On model 3620 only
2. On model 3620 only
3. Setting accessible on model 3610, yet the arrows are not visible
LIASSE 23261430-5.book Page 11 Mardi, 22. mai 2001 1:35 13
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sagem MF 3620 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info