1110
USING THE WATER DISPENSER (OPTION)
With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In
addition, you can save electricity by more than 30% reducing the number of times the door is open.
Push lever
Water tank cap
Water tank
Water supply device
WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWING WAYS ARE RECOMMENDED
FILLING THE WATER TANK
Overview
Fix the water supply device tightly into the fixing hole.
• The door will not be closed automatically when the water
supply device is pulled out for a long time because of cold
leaking.
Place a separate spare beverage bottle in the location
of the exclusive water tank.
• Two 1.5 litre bottles can be used.
Open the round cap and fill the water tank up with
drinking water.
• Fill the tank up to the full level (just over 4.2 litres).
Close the round cap by pushing down on it until it
clicks into proper place.
MAKING ICE
Pull out the ice cube maker.
Fill trays in up to the water level mark
(arrow).
Put the ice cube maker back in
position.
Close the freezer door.
A. Twist type
B. Normal type
Pour water into the ice cube maker.
• Fill the maker up to about 80% with
water.
Place the ice cube maker in the upper
freezer drawer.
To take out the ice cubes:
• Twist the ice cube maker slightly.
Making ice quickly
To make a large quantity of ice quickly, press the “SUPER” button to select the fast freeze
function.
Danger of explosion
• The coldest parts of the refrigerator are the rear panel and the lowest shelf. This is the best
place to store delicate foodstuffs.
• Glass bottles containing liquids that can freeze should never be stored in the freezer as the
glass will explode when the contents freeze.
Warning
Note
Place a cup on the tray dispenser, then press the
“PUSH” lever.
Once the water has become frozen,
turn the knobs on the ice cube trays to
empty ice cubes into the storage bin.
