Bedienungsanleitung Seiko H851 (Seite 16 von 17) (Englisch)

757461

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

●Inspection and adjustment by disassembly and cleaning (overhaul)

• Periodic inspection and adjustment by disassembly and cleaning (overhaul) is recommended

approximately once every 3 to 4 years in order to maintain optimal performance of the watch for a long

time. According to use conditions, the oil retaining condition of your watch mechanical parts may

deteriorate, abrasion of the parts may occur due to contamination of oil, which may ultimately lead the

watch itself to stop. Furthermore, the digital display may go out due to liquid leaking.

• The power transmission gear of the movement of this watch constantly receives force. To ensure that

this mechanism works properly all the time, washing parts, changing oil, adjusting accuracy, checking

functions and replacing consumable parts on a regular basis are important. The first overhaul after the

purchase of your watch is particularly important for preserving long-time use of your watch. According

to use conditions, the oil retaining condition of your watch mechanical parts may deteriorate, abrasion

of the parts may occur due to contamination of oil, which may ultimately lead the watch itself to stop. As

the parts such as gasket may deteriorate, water resistant performance may be impaired due to intrusion

of perspiration and moisture.

Please contact the retailer from whom the watch was purchased for inspection and adjustment by

disassembly and cleaning (overhaul). For replacement of parts, please specify “SEIKO GENUINE

PARTS.” When asking for inspection and adjustment by disassembly and cleaning (overhaul), make

sure that the gasket and push pin are also replaced with new ones.

• When your watch is inspected and adjusted by disassembly and cleaning (overhauled), the movement

of your watch may be replaced.

bCAUTION

Depending on the environment where a diver’s watch is used, its inner parts or movement

as well as its case or band may be affected. We recommend that you have your watch

overhauled regularly once every 3 or 4 years.

EN 56

TO PRESERVE THE QUALITY OF YOUR

WATCH

●Internal watch light (LED)

The watch uses a technique to uniformly diffuse light from a light emitting diode (LED) with a light guide

plate.

* If the battery is nearing the end of life and voltage decreases, illumination (brightness) will decrease.

●Liquid crystal panel

After the liquid crystal panel in this watch has been used for seven years, the contrast will decrease and

the numbers will be hard to read. Please get it replaced at the retailer from whom the watch was purchased.

They will replace it for a fee.

EN 57

TO PRESERVE THE QUALITY OF YOUR

WATCH

Troubleshooting

Troubles Possible causes Solutions Referen

The watch stops

operating. The power is completely depleted or

low.

If you wear the watch every day and

this occurs, the most likely cause is

the watch is hidden by your sleeves

or other clothing when you wear it

and it is not sufficiently exposed to

light.

Sufficiently charge the battery until

the seconds hand moves every

second.

When you wear the watch, try to

make sure that the watch is not

hidden by your sleeves or other

clothing. Additionally, when you take

the watch off, try to place it in a bright

place.

P. 37

The seconds hand

is moving at two-

second intervals.

Even if the watch

is charged until

“BATT 10” after it

stops, the

seconds hand

does not move in

one-second

intervals.

Or it does not

work.

The internal watch system is

unstable.

See “How to reset the system”

→ (P. 61) and follow the procedure. P. 61

EN 58

TROUBLESHOOTING

Troubles Possible causes Solutions Referen

The watch

temporarily gains/

loses time.

The watch has been left in extremely

high or low temperatures for a long

time.

If the watch returns to room

temperature, the accuracy will return

to its original state.

If it does not return to its original

state, contact the retailer from whom

the watch was purchased.

The watch has been left close to an

object with a strong magnetic field.

Correct this condition by moving and

keeping the watch away from the

magnetic source, and reset the time.

If this action does not correct the

condition, contact the retailer from

whom the watch was purchased.

The buttons do

not work

(Nothing happens

when they are

pressed)

The power is low.

Sufficiently charge the battery until

the seconds hand moves every

second.

P. 37

EN 59

TROUBLESHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Seiko H851 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Seiko H851

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info