■Prior to cleaning it, always turn off the vacuum cleaner using the main switch A4.
■For cleaning, never use abrasive cleaning products, solvents, etc.
■Neglecting cleaning and maintenance may negatively affect the functioning of the
vacuum cleaner and lead to its reduced performance.
DUST CONTAINER AND DUST FILTER
■Empty out the dust container A11 after every use and clean it regularly. Open the
lid A3 and take out the dust container. Open the dust container lid A14 and tip out
the contents of the container. For hygiene reasons, we recommend doing this away
from living areas.
■Remove the dust filter A12 and holder A13 from the dust container.
■Wash the dust container under running water and dry it well.
Note:
It is not necessary to wash the dust container after every use.
■Tap out or clean the dust filter using asoft brush and insert it back into the holder
and the dust container. If the filter is damaged, replace it with anew one.
■Using awet wiping cloth, clean out the area for the dust container A7 and the
exhaust hole A8.
■Return the closed dust container back into the vacuum cleaner and shut the vacuum
cleaner cover.
Attention:
Do not wash the dust container or the dust filter in adishwasher.
The dust filter must not be washed using water.
Before putting the vacuum cleaner back into operation, check
that the dust filter is in its location. Otherwise the vacuum
cleaner may be damaged.
SUCTION HOLE
■With repeat use, dust and dirt may accumulate around the suction hole A22, which
may manifest itself through decreased suction efficiency. To clean out the suction
hole, first take out the central rotary brush. Remove the dirt and dust from the
suction hole using asoft brush. Regularly clean the suction hole to ensure maximum
suction power.
CENTRAL ROTARY BRUSH
■Push on the latches F1 of the central rotary brush cover F2 and take the cover out
together with the brush.
■Use adry wiping cloth to clean out the area in which the rotary brush is housed.
Clean out the suction hole as described in the previous paragraph.
■Remove any dirt and material (dust, wound on hair, animal fur, etc.) from the rotary
brush.
■Reinsert the rotary brush and its cover.
ROTARY BRUSHES
■Remove the rotary brushes A17 and A23 by pulling them upwards. Remove any
dust and dirt from the location where the brushes were mounted.
■Remove all dust and dirt from the brushes. If necessary you may wash the brushes
under running water. If the bristles were deformed while the vacuum cleaner was
running, dip them in warm water to allow them to return to their original shape.
Allow the brushes to dry before reattaching to the vacuum cleaner.
■After cleaning them, reattach them.
Note:
The rotary brushes become worn out when used. After acertain time it
is necessary to replace the used brushes with new ones. To order new
brushes, please contact your vendor or an authorised service centre.
MOP
■After every use of the mop function, remove the duster D4, wash it by hand in
lukewarm water with the addition of asmall amount of gentle washing powder and
allow it to dry naturally. Wipe the water tank D1 using alightly dampened cloth
and then wipe it dry.
COMPLETE ROBOTIC VACUUM CLEANER
■Regularly wipe the surface of the vacuum cleaner using asoft dry wiping cloth.
■At least once per week or more frequently, clean the front swivel wheel A24, the
motorized wheels A19 and A26, the suction hole A22, rotary brushes A17 and A23
and the bottom sensors A15, A18 and A25.
■First remove any coarser dirt from the front swivel wheel and the motorised wheels.
Then clean them around their entire perimeter using alightly dampened cloth and
wipe them dry. Do not forget to also clean the area around the wheels.
■Wipe the sensors on the underside of the vacuum cleaner using asoft dry wiping
cloth or cotton bud.
CHARGING STATION
■At least once per week, clean the surface of the charging bast B3 including the
charging contacts B5 using asoft dry wiping cloth.
STORAGE
■When not using the vacuum cleaner for an extended period of time, do the
following:
■Clean the vacuum cleaner as described in chapter CLEANING AND MAINTENANCE.
■Remove the battery from the vacuum cleaner as described in chapter INSERTING
AND REMOVING THE BATTERY.
■Disconnect the charging station from the power socket.
■Store the vacuum cleaner with all its accessories in adry, clean and cool place.
TECHNICAL SPECIFICATIONS
Robotic vacuum cleaner
Dimensions (diameter × height) .............................................................................. 320 × 80 mm
Weight ................................................................................................................................................2.2 kg
Operating time per single charge ..............................................................................up to 90 min
Dust container capacity ........................................................................................................... 500 ml
Power adapter
Rated voltage range ....................................................................................................100−240 VAC
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Sencor SRV 2230 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
