Bedienungsanleitung Sencor SSJ 5050 (Seite 6 von 10) (Englisch)

758817

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN-6

Slow Juicer

SSJ 5050SS / SSJ 5051RD

THE PRINCIPLE AND ADVANTAGES OF A SLOW JUICER

• This juicer utilises a slow juicing system. In the ﬁrst phase, the screw shaft coarsely masticates the

inserted ingredients. In the next phase, juice is pressed out and pulp is separated. Juice extracted

using the slow juicing process contains only a minor amount of ﬁbre, oxidises slower and retains

valuable vitamins and enzymes.

• This juicer is suitable for juicing both soft and hard fruits and vegetables such as citrus fruits,

currants, gooseberries and other berries, apples, pears, carrots, beetroot, cucumbers, pineapple,

melon, etc. It can even handle leafy vegetables. However, in this case we recommend to juice

together with other fruits and vegetables.

• The slow juicer is not particularly suitable for juicing purely leafy vegetables, overripe fruits or

ﬂoury apples.

BEFORE FIRST USE

1. Remove all packaging materials from the appliance and its accessories.

2. Thoroughly wash all removable parts (pusher A1, feed tube with hopper and lid A2, screw shaft

A3, stainless steel strainer A4, juice collector A6 and the juice and pulp collector A9 and A0)

that come into contact with food in warm water using kitchen detergent. Then rinse all these parts

under clean running water and thoroughly wipe dry with a ﬁne wiping cloth. All removable parts

can also be safely washed in a dishwasher.

Attention:

Never submerge the motor unit Aqd in water or rinse it under running water.

ASSEMBLING THE JUICER

• During assembly, the appliance must be turned off and disconnected from the power socket.

1. Place the base unit Aqd on an even, dry and stable surface. Ensure that the sealing ring A5 is

properly attached to the juice collector A6. Place the juice collector A6 on to the motor unit Aqd

so that both outlets A7 and A8 ﬁt into the groove in the motor unit Aqd and that the motor shaft

ﬁts into the central hole in the juice collector A6.

2. Insert the strainer A4 into the juice collector A6 so that the symbol "•" marked on the top edge

of the strainer A4 is aligned with the same symbol on the top edge of the juice collector A6. This

will align the pulp outlet hole in the bottom part of the strainer A4 with the pulp outlet hole in

the juice collector A6. Push the strainer A4 downwards.

3. Insert the shaft A3 into the strainer A4 and push it downwards so that it is properly seated over

the hexagonal drive shaft on the motor unit Aqd.

4. Place the feed tube with hopper and lid A2 on to the juice collector A6 so that symbol" " on the

lid A2 is aligned with symbol "•" on the juice collector A6. Turn the feed tube A2 clockwise all

the way. This will secure the lid with the feed tube A2 on the juice collector A6.

5. Properly secure the lid A2 using both locking arms Aqa.

6. Insert the pusher A1 into the feed tube A2. Place the pulp container A9 under the pulp outlet

A7 and place the juice jug A0 under the juice spout A8. The juicer is now assembled and ready

for use.

7. The juicer is equipped with a safety mechanism that prevents it from being started unless it is

correctly assembled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sencor SSJ 5050 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info