Bedienungsanleitung Siemens Euroset 5020 (Seite 8 von 9) (Englisch)

121760

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

gigaset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-5-UP19 / 5020.fm / 09.10.2009

Assigning/changing function keys

?= Initiate function.

: Press the function key (=repertory key) that is

to be assigned.

If the function key is already assigned, the key

assignment appears in the display. If the mem-

ory for this function key is empty,

appears in

the display.

o Enter the key combination/code for the desired

service.

Important!

If a part of the key combination to be saved

includes numbers/characters that must be

changeable (e.g. a phone number for a

forwarded call destination, or a time for the

appointment reminder), the shift key

must be used in this place.

During a later activation of the service, this key

makes the cursor for entering the changeable

part flash.

? Press the Set key.

Example: Call forwarding

In the following, you will see an example of repertory keys

used as "function keys". If the symbol display is activated, in

the "call forwarding" example when the service is activated,

the symbol provided for it is displayed, or hidden when the

service is deactivated.

The key sequence for activating the function "call forward-

ing immediately" from your network provider consists of

e.g. three parts:

You now have the following options:

◆ You can dial the entire key sequence each time on the

keypad.

◆ You can save the key sequence on Repertory keys as an

entire function together with the phone number of a

set forwarded call destination

only the select function and the function end. With

this, you still have the option to set a forwarded call

destination that may change on a case-by-case basis.

Saving call forwarding on a function key

?= Initiate function.

: Press the repertory key that is designated for

the symbol display "

™

on", see "Deactivating/

activating the symbol display for additional

services" on page 7.

A number already saved is shown in the

display. If the memory for this repertory key is

empty,

appears in the display.

*21*

Enter the select function for "Immediate call

forwarding".

(a) Set the phone number for the

call forwarding

o Enter the phone number of the forwarded call

destination.

# Press the hash key to mark the function end.

? Press the Set key.

or ...

(b) Reserve changeable call forwarding

= Press the Shift key.

When "Call forwarding immediately" is acti-

vated later, this key makes the cursor for enter-

ing the phone number of the forwarded call

destination flash.

# Press the hash key to mark the function end.

? Press the Set key.

Activating call forwarding with a function key

c = Lift handset, press Shift key.

: Press the repertory key for the symbol display

™

on".

™

appears in the display.

(a) Phone number for call forwarding set

You may hear an announcement that the

service is activated.

a Replace the handset.

From now on, incoming calls will be forwarded

to the forwarded call destination. Your tele-

phone will not ring.

Select function Forwarded call destination End of

function

*21*

Phone number of the

forwarded call destination

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Euroset 5020 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Euroset 5020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info