Bedienungsanleitung Siemens Euroset 5020 (Seite 9 von 9) (Englisch)

121760

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

gigaset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-5-UP19 / 5020.fm / 09.10.2009

(b) Changeable call forwarding

o ; Enter the phone number of the forwarded call

destination, press the last number redial key to

mark the end of the phone number entered.

You may hear an announcement that the

service is activated.

a Replace the handset.

Incoming calls will be forwarded from now on

to the forwarded call destination. Your tele-

phone will not ring.

Saving "Deactivate call forwarding" on a function key

The call forwarding, as described in the previous example,

can be deactivated again with your network provider e.g.

with key sequence

#21#.

You can save this key sequence on a dedicated repertory key

as well. If the symbol display is activated and the service is

activated as described, the

™ symbol in the display disap-

pears after the service is deactivated.

?= Initiate function.

: Press the repertory key that is designated for

symbol display "

™ off", see "Deactivating/acti-

vating the symbol display for additional serv-

ices" on page 7.

#21#

Enter the select function for "Immediate call

forwarding".

? Press the Set key.

Deactivating call forwarding with a function key

c= Lift handset, press the Shift key.

:a Press the repertory key for symbol display

™ off". Replace handset.

The

™ symbol disappears. You may hear an announcement

that the service is deactivated.

Appendix

Care

To clean, wipe with a moist or antistatic cloth only, never

with a dry cloth (risk of electrostatic charging and

discharge) or harsh cleaning agent.

If your telephone is not working perfectly

No signal tone: The tone volume might be set to 0.

Lift handset, no dialling tone: Is the connecting lead

correctly plugged into the telephone and the telephone

socket?

Dialling tone audible but telephone will not dial:

The connection is OK. Is the dialling mode set correctly

(see page 5)?

PABX only: No connection or incorrect connection when

dialling from memory (e.g. redial, speed dial):

Program external line prefixe.

The other party cannot hear you: Have you pressed the

Mute key? Press the key again. Is the plug from the handset

cord inserted correctly?

Recall key does not work: Set appropriate flash time.

The caller's phone number and the calls list are not

displayed:

Is the adapter connected (see page 2)?

Can Calling Line Identification be used (see page 6)?

Insert strips

Blank insert strips for the repertory keys can be found on the

Internet at www.gigaset.com/cordedphones

Contacts

If you should encounter any problems when operating the

telephone connected to a communication system with

analogue network access, please contact the network

operator responsible or your dealer.

Authorisation

This device is intended for analogue phone lines in your network.

Country-specific requirements have been taken into consid-

eration.

We, Gigaset Communications GmbH, declare that this

device meets the essential requirements and other relevant

regulations laid down in Directive 1999/5/EC.

A copy of the 1999/5/EC Declaration of Conformity is availa-

ble at this Internet address:

www.gigaset.com/docs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Euroset 5020 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Euroset 5020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info