646918
94
Zoom out
Zoom in
Vorherige Seite
1/123
Nächste Seite
- 92 -
Select a start time
With this programme you can preset a specific start
time for the cooking or grilling of the foodstuff. If the
programming is carried out correctly, the appliance
starts automatically at the programmed time.
Take note: The clock must be correctly set to be
able to select the function "Selecting the start
time"..
1. Enter the desired cooking program:
For microwave operation: Press the button
Operation r the appropriate number of
times to set the required power level. Programme
the cooking time with the control dial 0.
For grilling: Press the button Grill 7 until
the desired grill function is activated. Set the re
quired cooking time with the control dial 0.
For convection operation: Press the button Con
vection 9 the appropriate number of times
to set the required temperature. Programme the
cooking time with the control dial 0.
For the combination process "Convection":
Press the combination button Microwave
Convention 6 the appropriate num
ber of times to set the required temperature.
Programme the cooking time with the control
dial 0.
For the combination process "Grill":
Press the combination button Microwave
Grill e the appropriate number of ti
mes to set the grilling process. Programme the
cooking time with the control dial 0.
For an automatic menu: Select the desired auto
matic menu using the control dial 0. Repeatedly
press the button Weight/Kitchen Timer w
until the desired weight appears in the
display 1.
2. Press the button Clock/Timer 8 . The
display 1 shows the currently set time and the
hour digit flashes.
3. Turn the control dial 0 to programme in the
hours.
4. Press the button Clock/Timer 8 , now
the minute figure flashes.
5. Turn the control dial 0 to programme in the
minutes.
6. Press the button Start/Quickstart 0 . The
hourglass appears in the display 1.
The microwave oven automatically starts the
cooking process at the programmed time.
Take note:
To query the saved start time, press the button
Clock/Timer 8 .
The saved start time will be shown in the display 1.
To delete the saved start time and thus cancel the
programmed procedure, press the button Clock/
Timer 8 so that the set start time appears
in the display 1. Then, while the start time is to be
seen in the display 1, press the button Stop/Child
safety q. The hourglass in the display 1
extinguishes. The saved procedure is deleted.
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

silvercrest-smw-900-eds-a1---ian-64337

Suche zurücksetzen

  • Sicherung haut immer raus bei Anschluss an einer Steckdose Eingereicht am 31-1-2017 01:14

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Silvercrest SMW 900 EDS A1 - IAN 64337 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Silvercrest SMW 900 EDS A1 - IAN 64337

Silvercrest SMW 900 EDS A1 - IAN 64337 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info