Bedienungsanleitung Skil 1021 (Seite 12 von 108) (Alle Sprachen)

758384

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

• Changing direction of rotation 0

- when not properly set in left/right position, switch A 2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Normal drilling versus impact drilling !

! select drilling function only when tool is switched

off and plug is disconnected

• Changing bits @

- insert the bit as deep as possible in the chuck

! do not use bits with a damaged shank

• Adjusting drilling depth #

• Holding and guiding the tool $

- always use auxiliary handle F 2 (can be adjusted

as illustrated)

! while working, always hold the tool at the

grey-coloured grip area(s)

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

APPLICATION ADVICE

• Use the appropriate bits %

! only use sharp bits

• For drilling in concrete or stone a steady pressure on the

drill is required

• When drilling ferrous metals

- pre-drill a smaller hole, when a large hole is required

- lubricate drill bit occasionally with oil

• Splinterfree drilling in wood ^

• Dustfree drilling in walls &

• Dustfree drilling in ceilings *

• Drilling in tiles without skidding (

• For more tips see www.skil.com

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool and cord clean (especially ventilation

slots H 2)

! disconnect the plug before cleaning

• If the tool should fail despite the care taken in

manufacturing and testing procedures, repair should be

carried out by an after-sales service centre for SKIL

power tools

- send the tool undismantled together with proof of

purchase to your dealer or the nearest SKIL service

station (addresses as well as the service diagram of

the tool are listed on www.skil.com)

ENVIRONMENT

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2012/19/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol 5 will remind you of this when the need for

disposing occurs

NOISE / VIBRATION

• Measured in accordance with EN 60745 the sound

pressure level of this tool is 94 dB(A) and the sound

power level 105 dB(A) (standard deviation: 3 dB), and the

vibration ✱ (triax vector sum; uncertainty K = 1.5 m/s²)

✱ when drilling in metal 3.4 m/s²

✱ when impact drilling in concrete 17.5 m/s²

• The vibration emission level has been measured in

accordance with a standardised test given in EN 60745; it

may be used to compare one tool with another and as a

preliminary assessment of exposure to vibration when

using the tool for the applications mentioned

- using the tool for dierent applications, or with dierent

or poorly maintained accessories, may signicantly

increase the exposure level

- the times when the tool is switched o or when it is

running but not actually doing the job, may signicantly

reduce the exposure level

! protect yourself against the effects of vibration

by maintaining the tool and its accessories,

keeping your hands warm, and organizing your

work patterns



Perceuse à percussion 1021

INTRODUCTION

• Cet outil est conçu pour les travaux de perçage de

percussion dans la brique ainsi que le perçage dans le

bois, le métal, la céramique et les matières plastiques

• Cet outil n’est conçu pour un usage professionnel

• Lisez et conservez ce manuel d’instruction 3

CARACTERISTIQUES TECHNIQUES 1

ELEMENTS DE L’OUTIL 2

A Interrupteur de marche/arrêt et réglage de vitesse

B Bouton de blocage de l’interrupteur

C Molette de réglage de la vitesse maximum

D Commutateur pour inverser le sens de rotation

E Commutateur pour sélectionner la fonction de perçage

F Poignée auxiliaire

G Jauge de profondeur

H Fentes de ventilation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Skil 1021 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info