Bedienungsanleitung Snooper syrius (Seite 40 von 45) (Englisch)

163031

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

9.0 Speed Camera Alert Patterns

To enable your Syrius to alert you to Fixed Speed Cameras and Accident Blackspots you will have to register

and download the Enigma

Camera Database.

9.1 Fixed Safety Cameras

As you approach the safety camera the unit will begin to provide both a voice alert stating the type of

camera you are approaching and the fixed speed limit for that camera and a visual alert displaying the

same information. The unit will also provide an audible tone (either a Soft or Hard beep depending on

your personalised setting) and the Syrius will provide updated information indicating the distance to the

camera. As you move closer to the camera the ‘beeping’ will quicken. Once you have passed the fixed

camera location, the unit will reset ready to alert you to the next potential accident black spot.

To cancel an alert click on the camera alert section of the screen the denotes that the alert has

been muted

9.2 Risk Zones

The alert for a Risk Zone is the same as the Fixed Camera Alert.

9.3 SPECs Safety Camera Systems

Due to the fact that the SPECs camera incorporates a series of cameras that monitor a vehicles

average speed over a fixed distance, a different alert pattern has been devised to ensure that your

concentration is maintained throughout the danger zone.

When approaching the first camera in the SPECs system your Syrius will begin to alert you at

approximately 700 yards with a display indicating ‘SPECS START’ and emitting an audible alert.

The display will indicate the speed limit at this point and then count down the remaining distance to the

location of the camera. The unit will then emit an audible alert and flash ‘SPECS’ every few seconds to

remind you that you are still within the ‘SPECS’ system.

The Syrius will indicate the end of the SPEC’s sequence by displaying ‘SPECS END’ and emitting an

audible alert.

If after thirty seconds you do not pass another camera, for instance if you have turned off the road

without passing the last camera in the SPEC’s sequence, the warning will no longer be displayed.

Please Note: If you join a road in the middle of a SPECs series you will automatically get a visual and

audible alert, indicating the type of camera, 300 yards before the first camera that you pass.

9.4 Saving User Points

If in the unlikely event that you pass the location of a safety camera and your Syrius

does not provide you with an alert, you have the opportunity to store the coordinates of

that location manually. Simply park safely and as close as possible to the site, then

press and hold the ‘M’ button for approximately two seconds. The following dialogue box

will be displayed.

Press the OK button to store the new location or press cancel if you do not wish to store

the new user point.

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper syrius Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper syrius

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info