Bedienungsanleitung Snooper syrius (Seite 41 von 45) (Englisch)

163031

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

User Points are displayed on the map as Green Camera

icons

For the Syrius to alert you to a user point correctly the user

point will need to be edited with the correct information such as

the user point type and speed. (the direction is saved

automatically). Please refer to 4.2.2 Editing User Points on

page 40 for full editing instructions.

9.4.1 Troubleshooting – Saving New User Points

When you attempt to save the new User Point and the display reads ‘Memory Full’ it means that the memory in your

Syrius is completely full. If you want to store any different coordinates you will have to either delete some or all of the

existing coordinates stored in the unit’s memory.

If you have subscribed and downloaded the Enigma camera database on to your Syrius you will be unable to store User

points if your are in close proximity to fixed cameras which are already in the database and are shown as

9.4.2 Deleting Stored Destinations

To delete individually stored Recent Destinations

Press the centre of the Syrius’s display to enter the menu, press the ‘My Favourite’ button at the top of the display and

then press the ‘Recent Destination’ icon. Scroll through the list of recent destinations using the up and down buttons

located on the right hand side of the display and select the destinations you wish to delete with your finger. The informa

tion relating to that destination is displayed now press the ‘Delete’ button at the bottom of the display. If the destination

selected is not the one you wish to delete you can press the ‘return’ arrow located in the bottom right hand corner

of the display to go back to the list and reselect the correct destination for deletion.

To delete ALL stored Recent Destinations

Press the centre of the Syrius’s display to enter the menu, press

the ‘My Favourite’ button at the top of the display and then press

the ‘Recent Destination’ icon. Press the ‘Delete All’ button and an

information box will displayed with ‘Delete All?’ with the options

of ‘OK’ and ‘Cancel’

Press the ‘Ok’ button and ALL the stored recent destinations

will be deleted.

9.5 Fixed Camera Pre-Alert Setting

The pre-alert setting means that you will receive an audible and a visual alert of a fixed speed camera or risk zone at an

automatically preset distance when utilising GPS.

Auto-range simply selects the correct alert distance to each camera detected depending on the speed limit of the road the

camera is situated on. The different alert distances are shown below.

Detection distances for Fixed Cameras Detection distances for Risk Zones

Speed Limit Pre-Alert Speed Limit Pre-Alert

20 or 30mph 200m 20 or 30mph 300m

40mph 250m 40 or 50mph 500m

50mph 300m 60 or 70mph 700m

60mph 400m

70mph 500m

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper syrius Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper syrius

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info