2-654-464-12(1) DSC-R1
2-654-464-12 (1)
© 2005 Sony Corporation Printed in Japan
Printed on 100% recycled paper using VOC
(Volatile Organic Compound)-free vegetable
oil based ink.
continued on the reverse
Digital Still Camera
Operating Instructions
Before oper
volume) thoroughl
Refer to “User’s Guide/Troublesho
(separate volume)
Explains ad
your camera.
Read This Firs
Read This Firs
DSC-R1
http://www.sony.net/
Checking the accessories su
• AC-L15A AC Adaptor (1) • Lens hood (1) • Shoulder strap (1)
• Power cord (mains lead) (1) • Lens cap (1) • CD-ROM (Cyber-shot
application software/Image
Data Converter SR) (2)
• Operating ins
“Read This First” (this
manual) (1
• Operating ins
“User’s Guide/
Troubleshooting” (1)
• Rechargeable battery pack
NP-FM50 (1)
• USB cable (1)
• Video cable (1)
Notes
• Charge the supplied NP-FM50 battery pack before using the camera for the first time.
• The LCD screen and th
over 99.99% of the pixels are operational fo
points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD scree
These points are normal in the manufacturing process and do not affect the recording in any
• The camera is a precision instru
apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. t “User’s
Guide/Troubleshootin
On carrying or storing
–
–
–
Additional information on this product and an
found at our Customer
Using the AC Adaptor
Use the camera connected t
• Connect the AC Adaptor to an easily accessible wall outlet (wall socket). If any trouble occurs, immediately
disconnect the plug from the wall out
• After use, disconnect the AC Adaptor both from the camera and from the wall outlet (wall socket).
• This set is not discon
(wall socket) even if the set itself has been turned off.
• Do not use the AC Adaptor pla
To check the remaining battery time
Set the POWER switch to ON to
To remove the battery pack
Open the cover and slide the battery
drop the battery pack.
To use your camera abroad — Power sources
You can use your camera and the
power supply is within 100 V to 240 V AC,
adaptor [a], if necessar
• It takes a
time appear
• The displayed time remainin
certain circ
• Do not use an electronic transformer (travel
converter), as
110min
Remaining indicator
Remaining time
Battery eject lever
AC-L15A
To change the date and time
Select [Clock Set] in the (Setup) screen and perform the proce3 above.
t “User’s Guide/Troubleshooting” (pages 32 and 82)
On the clock display
• If you sel3-1, set the time o
• Midnight is i
When turning on the power
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
• The following screen appears when the
To turn off the power
Set the POWER switch to OFF sliding in the arrow direction.
• If the camera is running on b not operate the camera for cert ain time, the camera
turns to Power Save m
change the setting t “User’s Guide/Troubleshooting” (page 7
Changing the language setting
You can change the screen display to show
language setting, press MENU to display (Setup) with
button, then, select [ Language] in (Setup1), and select the desired language. t “User’s
Guide/Troubleshooting” (page 80)
10M
94
M AF
110
min
ON
POWER
OFF
A
1
Insert a recording medium (not
supplied)
Available recording medium for the camera
You can use a “Memory Stick”, “Memory Stick Duo” (using Memory Stick
Microdrive, or CompactFlash
Switching the recording medium
“Memory Stick” “Memory Stick Duo”
(using Memory Stick Duo Adaptor)
Microdrive/
CompactFlash
1
2
1
2
Insert the “Memory St
Terminal side
“Memory St
Microdrive
Terminal side
Insert the
side as sho
Open the “Memory Stic
card cover.
Close the “Memory Stick”/C
card cover.
/CF switch
: When recording images onto a “Memor
from a “Memory St
CF: When recording images onto a Microdrive/CF card or playing back
images from a Microdrive/CF card.
Microdrive/CompactFlash
We have checked the compatibility of following M
Hitachi Global Storage Technologies, Inc.
DSCM-11000 (1 GB)
3K4-2 2GB (
3K4-4 4GB (
3K6-4 4GB (
3K6-6 6GB (
We have checked the compatibility of CF cards
II, however, we cannot guarantee proper operation of all CF cards.
• Copying between me
• You can insert a “M
image onto both th
• For more information abot “User’s Guide/Troublesho
• The Microdrive is a compact and lightweight hard disk drive that complies with CompactFlash Type II
standards. For more information about the Microdrive t “User’s Guide/Troubleshooting” (pag
• Before using a Microdrive/CF card, be suit using th
performance may not be obtained.t “User’s Guide/Troubleshoo
To remove a recording medium
Open the “Memory Stick”
“Memory Stick” in once
that the Microdrive/CF card is ejec
When the access lamp is lit
Never open the “Memory Stick”/CF ca
the power. The data may be corrup
Access lamp
CF card eject lever
Battery eject lever
Turn the camera on/set the clock
1 Select . 2 Set the POWER switch to ON sliding
in the arrow direction.
ON
POWER
OFF
Lighting
(Green)
3 Set the clock with the multi-selector.
1 Select the date display
selector to v /V , then press the center of the multi-sel
2 Select each item by moving to b /B a
value by moving to v/ V , then press the center of the
multi-selector.
3 Select [OK] by moving to B , then press the center of the
multi-selector.
• To cancel, select [Cancel]
2005
/:
/
1 1
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
2005
/:
/
1 1
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
2005
/:
/
1 1
10 30
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
Prepare the battery pack
Be sure to turn off your
/CHG lamp
Light on: Ch
Light off: Completed (D
• It takes approximately 180 minutes to charge
temperature of 25°C (77°F). Charging may t
• The lamp also lights up
1 Insert the battery pack.
Open the battery cover Firmly insert the battery
the way while pressing the
battery eject lever with the tip
of the battery
Close the ba
1
2
1
2
1
Bottom
AC Adaptor
2 Open the cover, and pull it out. Connect the plug
to the DC IN jack.
To wall outlet
(wall socket)
Power cord
(mains lead)
v mark
