Bedienungsanleitung Stanley BC4009 (Seite 6 von 10) (Englisch, Spanisch)

622133

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

10 11

for exchanges only (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their

specific return policy regarding returns that are beyond the time set for exchanges.

This warranty does not apply to accessories, bulbs, fuses and batteries; defects resulting from normal wear and tear, accidents;

damages sustained during shipping; alterations; unauthorized use or repair; neglect, misuse, abuse; and failure to follow

instructions for care and maintenance for the product.

This warranty gives you, the original retail purchaser, specific legal rights and you may have other rights which vary from state to

state or province to province. This product is not intended for commercial use.

Please complete the Product Registration Card and return within 30 days from purchase of the product to: Baccus Global LLC, 595 S.

Federal Highway, Suite 210, Boca Raton, FL 33432. Baccus Global LLC, toll-free number: (877) 571-2391.

SPECIFICATIONS

BC1509 BC2509 BC4009

Input: 120VAC, 60Hz, 4A 120VAC, 60Hz, 6.5A 120VAC, 60Hz, 9.5A

1100W engine start 1500W engine start

Output: 12VDC, 15A 12VDC, 25A 12VDC, 40A

75A engine start 110A engine start

(5 minutes OFF, 5 seconds ON) (5 minutes OFF, 5 seconds ON)

Imported by

Baccus Global LLC

595 S. Federal Highway, Suite 210

Boca Raton, FL 33432

(877) 571-2391

RD032213

The digital display shows the countdown. The bars on the battery icon will change from empty to solid (bottom to top)

repeatedly and the arrow logos pointing to the “+” and “–” flash.

*The countdown will commence from “8” to “0”.

3. When “0” is reached, the “pump engine” icon (

) will begin flashing for two minutes. The vehicle is ready to start.

4. Crank the engine using manufacturer’s guidelines, typically in 3 to 5 second bursts. The function requires a resting/cooling

period between attempts. Wait 4 to 5 minutes before a second attempt at starting the engine, if needed.

Two minutes after the “pump engine” icon flashes, the charger automatically reverts to charging mode. To stop charging, press the

charge button.

When disconnecting charger, disconnect AC cord, remove clamp from vehicle chassis, and then remove clamp from battery

terminal.

Using the Engine Start Function (BC2509 and BC4009)

1. Set up the battery charger and connect to the battery following steps 1 through 2 in the “Charging the Battery” section.

2. Press the engine start button. The LCD screen will display the following*:

The digital display shows the countdown. The bars on the battery icon will change from empty to solid (bottom to top)

repeatedly and the arrow logos pointing to the “+” and “–” flash.

*The countdown will commence from “90” to “0”.

Note:

The engine start countdown process can be terminated by pressing the engine start button again.

3. When “0” is reached, a beep will sound and the vehicle is ready to start.

4. Crank the engine using manufacturer’s guidelines, typically in 3 to 5 second bursts.

5. After cranking, the unit will automatically adjust the charging current to 2A for 5 minutes and then revert to charging mode. To

stop charging, press the charge button.

When disconnecting charger, disconnect AC cord, remove clamp from vehicle chassis, and then remove clamp from battery

terminal.

TROUBLESHOOTING

Unit Not Charging

• Check that the charger is properly connected to a live 120 volt AC outlet.

• If the battery to be charged has fallen below 2 volts, the battery cannot be recharged with these chargers.

CARE AND MAINTENANCE

Storage

• Store the unit in a clean, dry, cool place when not in use.

• Clean the unit casing and cords (as necessary) with a dry (or slightly damp) cloth. Ensure that unit is completely disconnected

from battery and power source before cleaning.

• To maintain the operating condition and maximize the life of the charger cords, always coil them loosely for storage. Do not wrap

them around the unit or crimp them with a tight band.

ACCESSORIES

Recommended accessories for use with your tool are available from the manufacturer. If you need assistance regarding accessories,

please contact the manufacturer at (877) 571-2391.

WARNING: The use of any accessory not recommended for use with this appliance could be hazardous.

SERVICE INFORMATION

Whether you need technical advice, repair, or genuine factory replacement parts, contact the manufacturer at (877) 571-2391.

ONEYEAR LIMITED WARRANTY

The manufacturer warrants this product against defects in materials and workmanship for a period of ONE (1) YEAR from the date

of retail purchase by the original end-user purchaser (“Warranty Period”).

If there is a defect and a valid claim is received within the Warranty Period, the defective product can be replaced or repaired in the

following ways: (1) Return the product to the manufacturer for repair or replacement at manufacturer’s option. Proof of purchase

may be required by manufacturer. (2) Return the product to the retailer where product was purchased for an exchange (provided

that the store is a participating retailer). Returns to retailer should be made within the time period of the retailer’s return policy

BC1509_2509_4009_ManualENSP_032213.indd 10-11 4/30/2013 6:21:00 PM

Stanley BC4009 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info