720837
3
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
3
NEVER intentionally short any battery
terminals.
DO NOT attempt to charge alkaline
batteries.
DO NOT dispose of batteries in re.
ALWAYS remove the battery if storing the
unit for over a month.
DO NOT dispose of this product with
household waste.
ALWAYS check local codes and properly
dispose of used batteries.
PLEASE RECYCLE in line with local
provisions for the collection and disposal of
electrical and electronic waste.
WARNING:
Carefully read the User Safety and
Operating Instructions before
using this product. The person responsible
for the instrument must ensure that all
users understand and adhere to these
instructions.
WARNING:
The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety.
OPERATING INSTRUCTIONS
BATTERY
Open the battery door on the handle of unit
and connect 2 AAA (1.5 V) batteries, ensuring
polarity is correct per the indication on the
inside of case. Replace battery door. It is
recommended to replace the batteries with
new batteries when battery indicator shows
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
.
USAGE
1. Point the IR Thermometer at the object
to be measured, pull and hold the
trigger. When the IR thermometer is in
measurement mode the LCD backlight
will illuminate and the laser will be on, the
measurement indicator “SCAN” icon will
also be displayed on the LCD.
When the trigger is released 3 audible
beeps will sound and the laser will shut off;
the last temperature reading will remain
on the LCD. After 15 seconds the LCD
backlight will turn off and after 1 minute the
IR Thermometer will turn off.
2. When the IR Thermometer is in the “ON”
state (trigger is not pulled), pressing the
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
button will select the desired unit of
measure: C° or F°.
3. When the IR Thermometer is in the “ON”
state (trigger is not pulled), pressing and
holding the
button for about 3 seconds
will turn the unit off.
4. When the IR Thermometer is in the
measurement mode (trigger is pulled and
held), pressing the
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
button will set the
reference temperature.
5. Press the
button to select the desired
temperature threshold (0.5°C/1°F, 3°C/5°F,
or 5.5°C/10°F). The
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
icon indicates your
current setting.
To disable the threshold feature, press the
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
button until the
OFF
SET
º
C/
º
F
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
icon is over the
“OFF” mark.
6. Once a reference temperature and
temperature threshold are set the unit
can be used to scan areas for changes in
temperature. While in measurement mode
the backlight will be green and “NORMAL”
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stanley STHT0-77365 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info