720837
4
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
4
User Manual
GB
will be displayed on the LCD if the
difference between the currently scanned
temperature and the reference temperature
does not exceed the temperature threshold
value. The background will be blue and
“LOW” will be displayed if the measured
temperature is lower than the reference
temperature by more than the temperature
threshold value (slow beeps will also
sound). The background will be red and
“HIGH” will be displayed if the measured
temperature is higher than the reference
temperature by more than the temperature
threshold value (fast beeps will also sound).
NOTE:
Shiny or polished items can give inaccurate
readings. To compensate for this, cover the
surface with masking tape or at colored
paint. After the tape or paint has been
given sufcient time to reach the same
temperature as the target underneath,
measure the temperature of the item.
The thermometer cannot measure through
transparent surfaces such as glass
or plastic. It will measure the surface
temperature of the transparent surface.
Steam, dust, smoke and other optical
obstructions can prevent accurate
measurements.
If the ambient temperature is lower than
0°C (32°F) or higher than 40°C (104°F),
the primary display will show “ERR”.
If the scanned temperature is
higher or lower than the limits of the
thermometer’s range the primary display
will show “HI” or “LO” respectively.
Field of View
The farther the thermometer is from a target,
the larger the target area will be, this is
known as the distance to spot (D:S) ratio. For
example: at a distance of 16 cm the spot will
be 2 cm in diameter. The thermometer will
display the average temperature across the
target area.
Specications
Temperature Measurement Range: -38°C to +520°C (-36.4°F to +968°F)
Response Wavelength: 7.5 – 13.5µm
Measurement Accuracy: ± 3°C(6°F) or 3% of reading, whichever is
greater
Distance to Spot Ratio: 8:1
Auto-off: After 1 minute of inactivity
Batteries: 2 x 1.5V AAA
IP Rating: IP20
Operating Temperature: 0°C to 40°C (32°F to 104°F), ≤75% RH
Storage Temperature: -20°C to +60°C (-4°F to +140°F), ≤85% RH
Laser Class: 2
Laser Power: ≤1mW
Laser Wavelength: 630-660nm
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stanley STHT0-77365 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info