Bedienungsanleitung Strong SRT 7510 (Seite 29 von 32) (Englisch)

751653

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

7.7 Network

The Network menu consists of the following submenus: RSS, Weather and IP Setting.

First, connect the CAT5E (or better) cable to the RJ-45 Ethernet port on your receiver and the other end

to the router.

Before you can use the Internet functions, you should check if the Internet connection was successful.

To do so access the IP Setting menu. Use pq to highlight the desired menu and press OK to enter the

menu. Press  to exit.

7.7.1 RSS (Really Simple Syndication)

In this menu you can use RSS feeds (links) to read the latest news and news from various sources. Use

pq to highlight the desired link and press OK. Now select a title or headline which you want to read.

Within the individual messages, use t u to quickly switch between the different messages of an

RSS source. If the content of a message exceeds a page, use P+/P to scroll the page. Press  to leave

the message. You can also delete, add or edit an RSS feed. Press the GREEN Add button to open the

keyboard. Use pq t u and OK to enter. Use P+/P for special characters within the keyboard. To save

the RSS link you created, select Save and press OK.

7.7.2 Weather

In this menu you can check the weather of your region. Use pq to highlight Weather from the Network

menu. If you are connected to the Internet, the Weather page will display details. Use the YELLOW

button City List to open the selection of the most important Austrian and German cities. The default

setting is Vienna.

Use pq or P+/P to highlight the city of your choice and press OK to select it. You can also search

manually for a desired place by pressing the GREEN Change City button. Use pq t u and OK to

enter. Use P+/P for special characters within the keyboard. To save the name, select Save and press OK.

The RED button is used to update the weather data and the BLUE button to change the unit between

Celsius and Fahrenheit.

7.7.3 IP-Setting

In this menu, you can set up or check the Internet connection.

By default DHCP is ON. Normally, this will automatically establish the connection. To test the Internet

connection, select SET with the pq butttons and press OK. If this succeeds, a message appears and

you can use the Internet functions of this receiver. If this does not work, check the cable or router or its

Internet configuration. Alternatively, set DHCP to OFF. Then manually enter IP Address, MASK, GATEWAY

and the DNS values with the 0-9 buttons. After entering these values, select Save and press OK to save.

8.0 TROUBLESHOOTING

There may be various reasons for abnormal operation of the receiver. Please check the receiver

according to the procedures shown below. If the receiver does not work properly after checking it,

please contact your local service line or STRONG dealer. Alternatively, you can send a support e-mail

via our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous

situation and will void the warranty.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7510 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info