751653
30
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Symptom Cause Remedy
The display on front
panel does not light up.
The power adapter is not
plugged in or power of an
extension is switched OFF.
Check that the power adapter is
plugged in to the wall outlet. Make sure
power switch on the extension cable/
distributor is in ON position.
No picture or sound Wrong connection or setting of
the Audio/Video output of the
receiver to TV.
Connect the Audio/Video output of the
receiver to TV correctly and check the
adjusted settings in the menu Settings>
System Settings.
Audio muted. Press the ! button on TV or receiver
remote control.
TV power off. Switch TV on.
No picture The receiver can't receive the
signal.
Check the antenna cable, replace the
cable, or connect the cable to the
receiver tightly.
Incorrect values of some tuner
parameters (e.g. one/some
channel(s) changed to another
TP).
Set the values of tuner parameters
correctly in menu Installation >
Channel Search. Helpful websites are:
http://de.kingofsat.net/
http://www.lyngsat.com/
Wrong direction of the antenna. Check the signal with a spectrum
analyser and adjust your antenna
correctly or consult a specialist.
No access to scrambled
services
Expired subscription. Check your current subscription status in
CA Menu> Product Status together with
your service provider.
ORF-DIGITAL-DIREKT not
subscripted/activated.
To enjoy the complete range of
channles and to watch your preferred
scrambled services, please register with
the enclosed registration form at ORF-
DIGITAL-DIREKT.
If you have further questions about your
registration, you can directly contact
the ORF-DIGITAL-Service-Hotline (0800
700 600). Please have your Device-ID
(Gerätenummer) ready.
Receiver awaiting activation
respectively new authorisation.
When receiver was switched off/
disconnected from signal for longer
it can take about 1-2 h until a valid
subscription is activated again.
No subscription for the selected
channel or activation not
possible
Switch to another channel respectively
remove channels (which cannot be
activated) from the channel list
The remote control
does not work
The batteries of the remote
control are not inserted, wrongly
inserted or exhausted.
Check whether the batteries are inserted
correctly or exhausted, if so replace the
batteries in the remote control.
26
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 7510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 7510

Strong SRT 7510 Bedienungsanleitung - Deutsch - 37 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info