Bedienungsanleitung Sygonix 43176W LAN Camera IR (Seite 3 von 8) (Deutsch, Englisch, Holländisch, Französisch)

565050

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

The home technology brand for the entire house. More information at www.sygonix.com

Operating instructions

LAN Colour Camera, IR

Intended use

The product is intended for surveillance by means of the integrated camera. The opera-

tion takes place via a wired 10/100MBit network (RJ45 connector). Due to its design,

the product is particularly suited for the installation on a ceiling.

The product must not get damp or wet, it is intended only for use in dry, indoor loca-

tions.

The power for the camera is supplied via the power transformer included in the de-

livery.

Please bear in mind that it is prohibited by law to watch strangers with a camera with-

out their knowledge and consent. Observe the rules and regulations of the country

where you are using the camera.

Any other use than that described above may damage the product. Moreover, this

may give rise to hazards such as short-circuiting, ﬁ re, electric shock, etc. No part of the

product may be modiﬁ ed or converted!

The safety instructions and technical data must be followed without fail!

This product complies with the applicable National and European requirements. All

names of companies and products are the trademarks of the respective owner. All

rights reserved.

Package Contents

• LAN Camera

• Network cable

• Installation material

• Wall plug transformer

• Mini DVD with software and an extensive operating manual in English language

(PDF)

• Quick guide

Explanation of the Symbols

The lightning symbol indicates a health hazard, e.g. electric shock.

This symbol indicates speciﬁ c risks associated with handling, function and

use.

The “arrow” symbol indicates special tips and operating information.

Safety Instructions

The warranty will be void in the event of damage caused by failure to

observe these safety instructions! We do not assume liability for any

consequential damage!

Nor do we assume liability for damage to property or personal injury

caused by improper use or failure to observe the safety instructions. The

warranty will be void in such cases.

• The unauthorised conversion and/or modiﬁ cation of the product is not per-

mitted because of safety and approval reasons (CE). Never dismantle the

product.

• The product is not a toy and must be kept out of the reach of children. It

should be operated out of the reach of children.

• The use of the surveillance camera system does not replace the personal

supervision of children, or people who require special assistance, but only

serves as a support to this supervision.

• The design of the wall plug transformer complies with protection class II.

Only use a proper outlet of the public supply system as a voltage source for

the power supply.

• The product should only be used in dry indoor areas, it must not become

damp or wet! There is a risk of a lethal electric shock!

• The camera should not be exposed to extreme temperatures, direct sun-

light, strong vibrations or heavy mechanical stress.

• Make sure that the connection cable is not pinched or damaged by sharp

edges.

• Do not leave packaging material carelessly lying around since it could be-

come a dangerous plaything for children.

• Handle the product with care, it can be damaged by impacts, blows, or ac-

cidental drops, even from a low height.

• If the camera is used with other devices (e.g. a monitor), the operating in-

structions and safety notices for these devices must be followed as well.

• It can be assumed that safe operation is no longer possible if:

- the device is visibly damaged,

- the device no longer works

- the device has been stored under adverse conditions.

- it was exposed to heavy loads during transport

• In commercial institutions, the accident prevention regulations of the Em-

ployer’s Liability Insurance Association for Electrical Systems and Operating

Materials are to be observed.

• Disconnect the power supply from the camera if it is not to be used for a

while (e.g. for storage).

• If you have any questions that are not answered in this manual, please con-

tact our technical service or another specialist.

Connection and Control Elements

1 Brightness sensor

2 Transparent cover

3 Black shield

4 Locking screw

5 Audio input (pink)

6 Audio output (green)

7 Video output (BNC)

8 Low voltage socket

for power supply

9 RJ45 connector for

network connection

10 Terminal block

11 Camera

12 IR-LEDs

Installation

• The mounting place must be clean, dry and dust-free, also, installation and opera-

tion must not be carried out in areas where there is a risk of explosion.

• First, remove the mounting plate by rotating it slightly counter-clockwise.

• For the feed-through of the connection cable with included plugs a hole is required

that is sufﬁ ciently big. Protect the plug connectors, e.g. with a small plastic bag,

from dust or dirt when pushing them through an aperture.

Due to the holes on the bottom, the camera can be mounted on a ceiling. Use suit-

able screws and wall plugs, depending on the surface.

Carefully rotate the camera inside in order for the screw holes to become accessible.

Don’t touch the electronics.

Pay attention when drilling and tightening the screws that no cable or pipes

are damaged!

Before you close the camera’s housing again, you should start up the camera so

that it can be aligned accordingly. The camera can be rotated and the inclination

adjusted. Furthermore, you can perform a focusing of the lens.

The camera should not be pointed directly at bright sources of light or the sun,

since the image will be overdriven by this.

• After start-up and adjustment of the camera, the cover must be replaced and locked

by a short, clockwise rotation. Hereby make sure that the black shield (3) is located

on the correct side.

Sygonix 43176W LAN Camera IR Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info