Bedienungsanleitung Sygonix 43176W LAN Camera IR (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

565050

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

The home technology brand for the entire house. More information at www.sygonix.com

These operating instructions are a publication by Sygonix GmbH, Nordring 98a, 90409 Nürnberg (www.sygonix.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁ lming, or the capture

in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is

prohibited. These operating instructions represent the technical status at the time of printing. Changes in techno-

Nr. 43176W - Version 08/11Legal notice

Connection and Getting Started

• Connect the camera’s RJ45 connector to a 1:1 connected network cable and its net-

work, e.g. a network switch. The cable length between camera and router/network

switch can be up to 100 m.

• Connect the low-voltage socket of the camera to the corresponding round plug on

the enclosed power adapter. Plug the power supply unit into a wall socket.

• Insert the mini DVD provided in the appropriate drive of your computer. If the in-

stallation software on the DVD does not start automatically, you must start the

installation programme manually. When this operating manual was prepared, the

programme was located in the main directory of the DVD (programme name “Auto-

run.exe”).

Follow the program’s instructions.

Be aware that the names and descriptions of the installation procedure, as described

here, may be changed in newer versions of the software. In this case please observe

the accompanying English language operating manual on the DVD (PDF format).

• Start the software that you just installed (“IP Discovery Tool”). It will search for

available cameras in the network. If the camera with its corresponding IP address is

shown, select the camera by double-clicking on it and then click on “Connect”.

Please note:

In your network a DHCP server must be active (e.g. the DHCP server of a rout-

er). The PC must be conﬁ gured so that it assigns an IP address automatically.

The camera is also assigned an IP address by the DHCP server.

If there is no DHCP server, the camera has the IP address 192.168.1.200 (net-

work mask 255.255.255.0). It is important that this IP address is not already

used by another device in the network. Otherwise, there is no access to the

camera!

• If the camera requests a user name and password, you have to enter “admin” for

both (written in lower case letters and without quotation marks).

• We recommend you to use Internet Explorer as the internet browser in order to be

able to use all functions of the camera. Prior to connecting to the camera, you have

to install an ActiveX plug-in.

Depending on the security settings for your Internet Explorer an error message ap-

pears, saying a required ActiveX element cannot be installed or that the installation

of the ActiveX can be started manually by clicking on the information bar.

This ActiveX element is necessary for the camera image to be shown.

• Furthermore, modiﬁ cations to the settings of the antivirus or ﬁ rewall programmes

may be required in order to have the software working ﬂ awlessly.

Unfortunately, due to the variety of programmes, programme versions and also op-

erating systems a precise description of the procedure is not possible.

• Further information regarding the software or camera can be found in the English

language operating manual on the accompanying DVD.

The operating manual is available as PDF ﬁ le on the DVD. To view these instructions

you need a program that can display PDF ﬁ les, e.g. Adobe Reader, which can be

downloaded for free at www.adobe.com.

Tips & Notes

• If there is a network or system administrator who is responsible for your network (for

example in a larger company) let him set up the connection and the cabling, do not

install the camera yourself!

• The Twisted-Pair cable between camera and router/network switch may be 100m

maximum. Use only 1:1 connected CAT5- or CAT5e cables.

• Focusing of the image is done through careful rotation of the focus ring outside on

the lens.

• The 24 IR LEDs can be switched on or off in the menu of the camera. In the menu

you can also set a speciﬁ c time period during which the IR LEDs are activated.

If the IR LEDs are activated, the camera only shows the image in black/white.

• Further information regarding the software can be found in the English language

operating manual on the accompanying DVD (PDF format).

Maintenance and Cleaning

The product does not require any maintenance and should never be disassembled for

any reason.

To clean the product, use a dry, clean and soft cloth; before cleaning, disconnect the

product from the power supply, unplug the AC adaptor from the mains socket.

Clean the lens very carefully to avoid scratch marks.

Do not use harsh detergents as these might cause discoloration of the housing.

Handling

• Observe the safety notes in this operating manual and all other information

on mounting and operation.

• Use only in dry indoor locations. The product must not get damp or wet.

There is a risk of a lethal electric shock!

• Never use the product immediately after it has been taken from a cold room

to a warm one. The condensation that forms might destroy the product.

Moreover, with the AC adaptor, there is danger of an electric shock!

Leave the product switched off and wait until it has reached room tempera-

ture before you use it. This may take several hours.

• Any service or repair work must only be carried out by authorised personnel.

• If the product is not to be used for a while, unplug the wall plug transformer.

• Avoid the following adverse conditions at the installation location and dur-

ing transportation:

- Excessive humidity or damp

- Extreme cold or heat

- Dust or ﬂ ammable gases, fumes or solvents

- Strong vibrations

- Strong magnetic ﬁ elds such as those found in the vicinity of machinery or

loudspeakers

Disposal

Electrical and electronic products do not belong in household waste!!

Please dispose of the product, when it is no longer of use, according to the

current statutory requirements.

Technical Data

Camera:

Sensor resolution: 1,600 x 1,200 (2 mega pixel, CMOS)

LAN: 10/100 Mbit

Microphone/Loudspeaker: built-in

IR LEDs: 24

IR range: Max. approx. 20 m

Ambient temperature: 0 °C to +50 °C

Ambient air humidity: 20% to 80% relative air humidity, not condensing

Dimensions (Ø x D): 112 x 83 mm

Weight: approx. 410 g (incl. cable)

Plug mains unit:

Operating voltage: 100 - 240 V AC, 50-60 Hz

Output: 12 V/DC, 1 A

Sygonix 43176W LAN Camera IR Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info