Bedienungsanleitung Telekom Digitalisierungsbox Premium (Seite 4 von 4) (Deutsch)

679709

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

For optimal WLAN performance attach both of the

supplied antennas to the device.

V. 2.0 - 20150223 - 5500001785

Info

LEDs

System requirements

Automatic configuration

ISDN connection

Select operating mode

Side view

Scope of supply

LEDs back view

Status Green

Service Yellow

The LEDs are linked to those on the top of the

device and show the identical behavior.

Mounting Brackets

Due to the position of the devices in a rack it is recommended to use remote antenna. Attach

the mounting brackets to the device using the supplied screws.

The mounting brackets and screws are available as an accessory (Part No. MN40285514).

During operation in a rack the ambient temperature must not exceed 40° C.

Software Update

Antenna connector

WLAN

First-time use of the Premium Digitalisierungsbox

Automatic configuration is a service for Telekom customers that you can use with your

Digitalisierungsbox.

Connect the Digitalisierungsbox to the mains. Connect the cables to the appropriate sockets/

jacks. Wait until the Service LED goes out.

Start an Internet browser, enter telekom.de in the address bar and confirm with the Return key.

You are redirected to the Telekom autoconfiguration page. Enter your access ID and your

password and click on Start Configuration. During automatic configuration, the Service LED

will light up.

Wait until a confirmation is displayed that the configuration has been successful. The Service

LED is no longer lit now.

If the Telekom webpage does not open, first check all cabling.

For the configuration of the device, the following system requirements must be met:

 Operating system Microsof

t Windows XP SP3 or later; Windows XP SP3 requires the following

hotfix: http://support.microsoft.com/kb/953761

 Internet Explorer version 7 or 9 or later (the security settings may need to be adjusted),

Mozilla Firefox version 4 or later, Chrome

 Installed network card (Ethernet)

 Installed TCP/IP protocol

 PC configured to automatically obtain IP address and DNS server

 High colour display (more than 256 colours) to show graphics accurately

Case 1: If the p

assword has not yet been changed, you can select the operating mode once

you log in.

Case 2: If the password has been changed, the device has been configured as a telephone

system ex works.

You can also change operating mode in the menu Assistants Ô First Steps Ô Operating

Mode. Note that some features will not then be available. Assembly and the basic configuration

are exactly the same.

If you switch from telephone system to media gateway or from media gateway to

telephone system, the device does a factory reset.

This means that the device reverts to condition it was in when it was supplied.

The configuration is deleted and all the passwords are reset.

 Premium Digit

alisierungsbox

 One Ethernet LAN cable (yellow)

 One Ethernet WAN cable (blue)

 One DSL cable (black)

 Two connector cables analogue terminals (grey)

 Power supply unit

 Two Wi-Fi antennas

 Installation poster

 Safety instructions

The switches for terminating the ISDN interfaces can be found on the bottom / in the lower

housing. Both switches are set to ON ex works. This means that termination is enabled and

the device is preconfigured for the operation of all common applications.

The device is delivered with the system software version which is current at the time of

production. The system software is continually being upgraded to improve the security and

functionality of the device. When you first start the device, you may be prompted to update the

software. If you have access to Telekom's automatic configuration, the system software for

your device will automatically be updated to the latest version.

Alternatively, you can update the software in the User view. To use this option to update the

system, you require a functioning Internet connection.

Under Firmware Update, click Update to start the process.

Do not interrupt either the power supply or the internet connection.

Whenever new system software has been installed, you need to restart the device.

Should an error occur during the update process, do not restart the device and contact

customer service.

You can call the free numbers 0800 330 1300 or 0800 330 2870 (for corporate clients) during

normal business hours for any further advice on your Digit

alisierungsbox.

You can also find more information online at http://hilfe.telekom.de.

If you think your connection may be faulty, please call Technical Customer Service free

of charge at the respective number above, or refer to http://hilfe.telekom.de.

Please read the user guide before connecting the device or starting it up!

Reset

The reset is performed by using the reset button at the terminal area.

The device is rebooted by quickly pressing the key (ca. one second). Pressing the key is equivalent

to an interruption of the power supply. Saved data are preserved, but all connections are interrupted.

If you press the reset key for approx. 30 seconds, the device performs a factory reset. This means

the device is returned to its ex works state. Connection data for incoming and outgoing phone calls

are preserved. The configuration is deleted and all passwords are reset.

The reset has finished once the status LED flashes continuously again after approx. 30 seconds.

LED Colour Status Information

Service Yellow on Undergoing automatic maintenance

off No automatic maintenance

Mem. off Memory is ready for read/write accesses

Green flickering Read/write access

WLAN off WLAN or all assigned wireless networks disabled

Green slow Wireless network is enabled, no client is logged in

flashing

Green flashing Wireless network is enabled, at least one client is logged in

quickly

Green flickering Wireless network is enabled, at least one client is logged in,

there is some data traffic

DSL Green on Connection established

Green slow Synchronisation running

flashing

off No synchronisation

Green flickering Data transfer

TEL Green on Telephony ready at IP connector (Voice over IP)

off Telephony not configured

ISDN1/2 Green on ISDN telephone system connected

off On standby or not functioning

Status Green on After switching on: Device is started

While operating: Fault

Green slow The device is active

flashing

Power Green on The power supply is connected

off No power supply

OFF

PowerStatusWLAN DSLMem. TEL ISDN1 ISDN2Service

Reset

DSL LAN1 LAN2 LAN3 LAN4 LAN5 ISDN1 ISDN2 a/b1 a/b2 a/b3 a/b4

Reset

LED Colour Status Information

LAN 1  4 (Link/Act) Green On Ethernet connection established

(Link/Act) Green Flashing Data transmission via Ethernet

(Link/Act) Off No Ethernet connection

(Speed) Green On 1000 Mbit/s transfer rate

(Speed) Orange On 100 Mbit/s transfer rate

(Speed) Off 10 Mbit/s transfer rate

LAN 5 (Link/Act) Green On WAN-Ethernet connection established

(Link/Act) Green Flashing Data transmission via ETH 5

(Link/Act) Off No Ethernet connection

(Speed) Green On 1000 Mbit/s transfer rate

(Speed) Orange On 100 Mbit/s transfer rate

(Speed) Off 10 Mbit/s transfer rate

The LEDs for the Ethernet sockets LAN-4 (LAN) and LAN5 (WAN) show the following status information:

Telekom Digitalisierungsbox Premium Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telekom Digitalisierungsbox Premium

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info