577039
4
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
6 7
ScanTemp 410 – Infrared Thermometer
Introduction:
We are confident you will find many uses for your
ScanTemp 410” non contact thermometer. It is compact
and easy to use. Within one second you can safely measure
surface temperatures without contact, even of hot, haz-
ardous, or hard-to-reach objects.
With the laser pointer the measuring point can be focused
exactly.
Features:
2 x 1.5 Volt batteries AAA included
Large LCD-display with backlight
Indication of measured value and maximum value
Auto power off after 15 seconds
Switch °C/°F
With laser pointer
Use:
Just aim at the measuring
object and press the measure
button
Read the surface tempera-
ture in a second.
Distance, Spot Size, and Field of View
As the distance (D) from the object increases, the spot size
(S) of the area measured by the unit becomes larger at a
ratio of D:S = 12:1. To get the most accurate temperature
reading, aim at the target as near as possible.
ScanTemp 410 – Infrared Thermometer
Safety Cautions:
ƽ EMC/RFI
Protect the unit from EMI (Electro
Magnetic Interference) from in-
duction heaters and microwave
ovens and Electro Static Discharge.
Readings may be affected if the
unit is operated within a radio fre-
quency electromagnetic field
strength of approximately 3 volts per meter, but the per-
formance of the instrument will not be permanently
affected.
ƽ Attention
Do not look directly into the laser beam – permanent
eye damage may result.
Keep out of the reach of children
Protect the unit from “thermal shock” (caused by large
or abrupt ambient temperature changes).
Do not leave the unit on or near objects of high temper-
ature.
Not recommended for taking human temperature.
Battery:
Change the battery when the middle or right battery
power symbol appears on the display (2 x 1,5 Volt AAA).
Remove the battery compartment opening the cover in
direction of the arrow.
Attention: Confirm the unit is power off before chang-
ing battery.
Attention: Please do not dispose of old electronic devices
and empty batteries in household waste. To protect the
°C/°F-Button Measure-Button
Battery OK Battery almost
exhausted
replace
soon
Battery
exhausted
replace
at once
TFA Anl. No. 31.1115_03/10 15.03.2010 10:32 Uhr Seite 4
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TFA 31.1115 ScanTemp 410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info