Bedienungsanleitung Toshiba RDXV59 (Seite 34 von 84) (Englisch)

465047

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

5 Select the digital (DVB) / analogue (ATV) mode

or external input (AV1/AV2) using [K \ L], then

press [B].

6 Select the channel number to record using

[K \ L], then press [B].

7 Select the recording media (“HDD” or “DVD”)

using [K \ L], then press [B].

8 Select the recording mode using [K \ L], then

press [B].

Refer to “Recording Mode” on page 28.

Select “STTL” to “ON” or “OFF” using [K \ L].

If you set “STTL” to “ON”, subtitle will be recorded too.

• When analogue channel is selected, “PDC” will be

displayed instead of “STTL”.

Select “PDC” to “ON” or “OFF” using [K \ L].

Refer to “PDC (Programme Delivery Control)” on this

page.

• When DVB channel is selected, “STTL” will be displayed

instead of “PDC”.

• PDC system is only available for HDD.

• PDC system is not available for “Daily” and “M-F” timer

programme.

10 Press [ENTER\OK] when all information

required is entered.

Your programme setting is stored.

• To set another programme, repeat steps

2 to 10.

• To exit, press [TIMER PROG.].

• When 2 or more programmes are overlapped, “Timer

programme overlapped” appears, and the overlapped

programme will be displayed in blue. To correct the timer

programme, refer to “Checking, Cancelling or Correcting

the Timer Programming Information” on this page.

The icon will appear on the front panel display.

Note

• If you have not set the clock, the clock setting window will

appear instead of the Timer Programming list. Continue

from “Clock Setting” on page 71 before programming the

timer.

•Press [K \ L] to move the cursor in “Timer Programming”

list.

• If you have a timer programme with PDC function, and if you

are watching different channel from the timer programme,

confirmation message to change the channel will appear 15

minutes before the programme starts (the message will also

re-appear 30 seconds before the programme starts). The

channel will automatically be changed to the programmed

channel 15 seconds before the programme starts.

Alternate recording (DVD only)...

If there is no recordable disc in the unit, if the disc does not

have enough space to complete the recording, or if the

material is “copy-once” programme and prohibited to be

recorded on a DVD in the unit, the unit will detect it and

automatically record to the HDD even when DVD is selected

as the recording media. If the available space on the HDD is

less than that of DVD, the unit will not perform the alternate

recording. This feature is available only for timer recording.

Not available for one-touch timer recording.

The Programme Delivery Control (PDC) assures that the TV

programmes you have programmed for timer recording are

recorded exactly from beginning to end, even if the actual

broadcasting time differs from the scheduled time due to a

delayed start or extension of the programme duration.

Furthermore, if a programme is interrupted, the recording will

also be interrupted automatically and resumed when the

programme starts again.

If the PDC signal drops out because the broadcast signal is

weak, or if a broadcasting station does not transmit a regular

PDC signal, the timer recording is performed in normal mode

(without PDC) even if it was programmed for PDC. If the

starting time of the PDC timer recording is between 0:00 and

3:59 on a given day, the PDC function will operate from 20:00

on the previous day to 4:00 on the next day. If the starting time

of the PDC timer recording is between 4:00 and 23:59 on a

given day, the PDC function will operate from 0:00 on the

given day to 4:00 on the next day. This means that if the

relevant programme is broadcasted within this period, it is

recorded correctly. If the timer is not programmed correctly,

the incorrect timer setting stays in effect unless you cancel it.

To cancel an incorrect timer setting, refer to “Checking,

Cancelling or Correcting the Timer Programming Information”

on this page.

Note

• This feature is only available for analogue channels.

• If DVB channels have been stored in this unit, you cannot

select PDC on.

1 Press [TIMER PROG.].

2 A) To delete the timer programme:

1) Select the programme you want to delete using

[K \ L], then press [ENTER\OK].

2) Select “Delete” using [K \ L], then press

[ENTER\OK].

Confirmation window will appear.

3) Select “Yes” using [K \ L], then press [ENTER\OK].

B) To correct the timer programme:

1) Select the programme you want to correct using

[K \ L], then press [ENTER\OK].

2) Select “Programme Change” using [K \ L], then press

[ENTER\OK].

3) Correct the timer programme by using [K \ L \ { \ B],

then press [ENTER\OK].

3 Press [TIMER PROG.] to exit.

To check the timer programming in progress

Press [TIMER PROG.].

Note

• For EPG timer recording, you can only correct the “REC To”,

“Mode” and “STTL”.

9 For DVB channel recording:

For analogue channel recording:

1/1

03/120:00

06/12

07/12

7:00

9:00

17:00

9:00

9:30

18:00

DVB 18

DVB 190

1 BBC1

Timer Programming

Date Start End CH

New Programme

STTL

PDC

THU

PDC (Programme Delivery Control)

Checking, Cancelling or Correcting the

Timer Programming Information

E3TK2BD_EN.book Page 34 Thursday, April 16, 2009 12:00 PM

Toshiba RDXV59 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info