Bedienungsanleitung Trixie TX8 Smart (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

782773

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Technische Daten

Modell: TX8 Smart

Fassungsvermögen: 4,3 Liter

Frequenzband: 2.4 – 2.48 GHz

Sendeleistung: ≤20 dBm (EIRP)

WiFi-Standard: 802.11 b/g/n/

Stromversorgung: Netzteil, DC 5 V; 2 A

Netzteil: Modell: AS1201A-0502000EUL

Nennspannung: 100-240 V ~, 50/60 Hz; 0,35 A MAX

Ausgangsspannung: 5 V, 2000 mA

Abmessungen (B × H × T): 24 × 38 × 19 cm

Gewicht: ca. 1,3 kg

Bei Fragen zu Ihrem Smart-Gerät kontaktieren Sie bitte den

Support: smartsupport@trixie.de

Die Bedienung dieses Gerätes erfolgt mit Hilfe der in den App Stores

kostenlos verfügbaren App „Tuya Smart“ der Tuya Inc.

Bitte beachten Sie die dort genannten Nutzungsbedingungen und

Datenschutzhinweise.

EInstructions

• Read the operating instructions before use.

• The pet feeder is not a toy for children. Do not let children play with

the packaging foil. Danger of suffocation!

• The feeder is only suitable for dry food (diameter 5 - 15 mm).

• Do not use it with puppies and kittens under 7 months.

• The base unit must not get wet - not dishwasher suitable.

• Additional instructions for the use of IOT devices can be found at the

end of this manual.

Electric Shock Hazard!

• Incorrect use may result in electric shock.

• The mains voltage of the socket must match the speciﬁcation on the

automatic feeder.

• Ideally, use an easily accessible socket so that you can quickly dis-

connect the feeder from the mains if necessary.

• Do not use the feeder if there is visible damage to the appliance or

the mains cable or plug.

• Do not open the feeder, but contact our customer service.

• Do not use a timer or other remote control system.

• Never touch the mains plug with wet hands.

Safety

• The feeder is suitable for indoor use only.

• Place the feeder on a level surface. The feeder must be sufﬁciently

ventilated on the sides.

• Only use the feeder with the feed container and lid, and do not place

anything on top of it.

• Never pull the mains plug out of the socket by the cable, always

grasp the mains plug.

• Do not use the power cord as a carrying handle.

• Keep the feeder and power plug away from open ﬂames and heat.

• Route the power cord so that it does not become a tripping hazard.

• Do not kink the power cord or place it over sharp edges.

• Do not allow your pet to nibble on the feeder or cord. If necessary,

protect it with a cord protector.

• Never reach for an electrical appliance if it has fallen into the water.

In such a case, unplug the appliance immediately.

• Unplug the feeder when not in use or when cleaning it.

Preparation

1. Connect the feeder to a power source using the power plug. Turn on

the main switch on the bottom.

2. To control and program the feeder, download the „Tuya Smart“ app

to your mobile phone or tablet. By scanning the QR code, you will be

taken directly to the download:

3. Optionally, you can insert 3 x D Mono batteries into the device as an

emergency power supply. The programmed feeding times can thus

be guaranteed even in the event of a power failure. Please note that

the feeder is not accessible via the app in emergency mode.

How to Register

Open the app and click on REGISTER to create an account.

Coupling the Device

In the next step, the automatic feed dispenser is connected to the

internet and coupled to your smartphone. Please be sure to follow

the following instructions to ensure trouble-free connection:

• The automatic feed dispenser should be place near (max. distance

3 m) your WLAN router while the connection is established. At the

same time, your smartphone should be quite close (max. distance

1 m) to the feed dispenser.

• Ensure that your smartphone is connected to the WLAN and has a

high signal level.

• Please note that coupling the automatic feed dispenser only works

at the frequency of 2.4 GHz. If you have a WLAN router that sends

out 2.4 GHz as well as 5 GHz, you have to make sure you choose

the right frequency band.

•

There are two options for coupling the device: EZ mode and AP mode.

Some dual-band routers use a joint SSID (name of the network) for both

frequencies. If that is the case, the coupling in EZ mode will only work if

your first separate both frequency bands in the settings of your router

and assign a separate SSID for both frequencies. As an alternative, you

can also deactivate the 5 GHz temporarily. Check in the manual of your

router if you are not sure what type of router you have or how you can

change these settings. The AP mode described further down offers ano-

ther option how to solve the problem. This coupling mode works with

dual band routers without prior separation of both frequencies.

• Please note that the feeder will not work in 5.0 GHz-only networks.

• If your Wi-Fi password contains special characters, you may expe-

rience problems during the pairing process. Change your wireless

password to contain only letters and numbers.

AP Mode (Recommended)

1. Press the SET button at the top of the device 11 times quickly to

activate AP mode. An acoustic signal conﬁrms the activation, and a

green indicator light should begin to ﬂash slowly after a few seconds.

2. In the app, select ADD DEVICE and then select SMART CAMERA

under SECURITY & VIDEO SURVEILLANCE (Wi-Fi).

Trixie TX8 Smart Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info