Bedienungsanleitung Trotec BP21 (Seite 8 von 10) (Englisch)

756403

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

8 EN

pyrometer BP21

Switching the laser pointer on or off

Ex works the laser pointer is switched off.

Danger

Please observe that with a switched-on laser the laser

pointer will go on as soon as you press the

measurement button(6) or activate continuous

measurement.

Warning of laser radiation

Class 2 laser radiation.

Lasers of class 2 only radiate in the visible range and

during continuous wave operation (lasting beam) no

more than 1 milliwatt (mW) of output will be emitted.

Looking directly into the laser beam for a longer period

of time (more than 0.25seconds) can cause damage to

the retina.

Avoid looking directly into the laser beam. Never look

into the laser beam using optical aides. Do not

suppress the winking reflex when looking into the laser

beam unintentionally. Never point the laser beam at

people or animals.

1. Press the Laser button(4) when the device is in operation.

ðThe laser indication(19) appears on the display(1).

ðThe laser pointer is switched on.

2. Press the laser button(4) again to switch the laser pointer

off.

ðThe laser indication(19) is no longer displayed.

ðThe laser pointer is switched off, memorising the

selected settings.

Switching the display illumination on or off

The display illumination is switched off by default and can be

switched on or off as needed by pressing the lamp button(2).

For this purpose, the device must be in operation.

The device memorizes the selected setting when switching off.

Further setting options

1. By use of the Mode key(3) you can access the extended

choice of settings. The alarm threshold and temperature

unit can be selected here, for instance.

2. Enable the device file by pressing the measurement

button(6). Press the Mode key(3) several times to reach

the desired setting:

Number Menu option Description

1x Setting the

degree of

emission

Further information regarding the

degree of emission can be found in

the chapter "Information about the

device").

2x Setting the

temperature

unit

The measured value can be displayed

in °C or °F.

3x Activating

maximum or

minimum

value

According to the selection, either the

highest or the lowest measured value

will be displayed.

4x Activating

continuous

measurement

The symbol for continuous

measurement(20) flashes on the

display. By pressing the laser

button(4) (up) and the lamp

button(2) (down), the continuous

measurement function can be

activated(ON) or deactivated(OFF).

Adjust the settings as required and

press the measurement button(6) to

activate it. With activated continuous

measurement you can adjust the

degree of emission to changing

grounds by means of the laser

button(4) (up) and the lamp

button(2) (down). On the other hand,

it is no longer possible to switch the

background illumination or the laser

beam on and off. For this reason,

select the corresponding setting

before activating continuous

measurement. By pressing the

measurement button(6), continuous

measurement can be deactivated

again.

5x Enabling/

disabling the

upper alarm

threshold

Upon exceeding the selected upper

alarm value, an acoustic alarm signal

is emitted.

6x Entering the

upper alarm

value

Here you can enter the value for the

upper alarm threshold.

7x Enabling/

disabling the

lower alarm

threshold

Upon exceeding the selected lower

alarm value, an acoustic alarm signal

is emitted.

8x Entering the

lower alarm

value

Here you can enter the value for the

lower alarm threshold.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BP21 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BP21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info