Bedienungsanleitung Uspeed Wifi repeater (Seite 3 von 10) (Englisch)

706169

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 3 -

- 4 -

Steps for Repeater Mode Wireless Setup

Access Point (AP) mode - Connect to an existing

Wi-Fi router with a long network cable and place

this device in a strategic farther location for

extended wireless range. Since the cable provides

a stable and direct signal, we recommend this

mode wherever possible.

Repeater Mode - Repeater mode boosts the

coverage of your existing wireless network by

detecting the wireless signal and repeating it to a

farther range. We recommend this mode when

cabling is impractical or when you require ﬂexibility

to move the repeater from one room to another.

In both instances, the device will create a new

wireless network. When moving between wireless

networks, you may need to manually switch

networks on your laptop or mobile device to connect

to the stronger signal.

Please refer to Page 11 for AP Mode Setup

If this is not your ﬁrst time setting up this device, we

recommend that you ﬁrst reset to start anew. Please

refer to Page 16 for reset instructions.

Access Point (AP) mode Repeater Mode

Step 1. Confirm Live Internet Connection

Please verify that your router or DSL modem is working

properly and that your existing devices can connect to

the Internet successfully.

Step 2. Select Repeater Location

Identify the wall socket where you would like to place

the repeater. Ensure that your desired location has a

stable Wi-Fi signal from your original router. > 70%

signal strength is ideal, while signals < 50% strength may

reduce your network speed and connection stability.

Step 3. Connect Computer to your Repeater

1. Plug the repeater into a wall socket; allow a 1-minute

start up time.

2. Connect your computer to the repeater wirelessly:

From your computer, view your available wireless

connections (typically accessible from the corner

of your desktop).

Choose the newly available “WiFi-Repeater”

network and connect. Note that no password is

needed at this time.

Step 4. Temporarily change the IP address

setting of your computer

1. Open the IP setting dialog on your computer

For PC users

Windows 7

Go to Start > Control Panel > Network & Sharing

Center > Change Adapter Settings (or Manage

Network Connections).

Windows XP

Go to Start > Control Panel > Network Connections.

Among the list of connections, right click

“Wireless Connection.”

Click “Properties” in the pop-up menu. The

“connection properties” window will appear.

In this window, double click “Internet Protocol

Version 4(TCP/IPv4).” The IP setting dialog will

appear.

For Mac users

Click the Wi-Fi icon from the top-right corner

of your desktop and choose “Open Network

Preferences.” The network conﬁguration window

will appear.

On the left of the window, select your Wi-Fi

connection. Then click “Advanced…” on the lower

right side.

Select the TCP/IP tab, and the IP setting page will

appear.

2. Record the current IPv4 settings before proceeding

Note: Computers are often set to “Obtain an IP

address automatically” via the DHCP setting. If it is

not, you need to write down the exact information of

your IP address, subnet mask and default gateway.

3. Temporarily change the IP address of your computer

From the IPv4 settings, switch to conﬁgure your IP

address manually.

Type in the following settings:

• IP address: 192.168.10.111

• Subnet mask: 255.255.255.0

• Default gateway/Router: 192.168.10.1

• Note: Do not change DNS settings

Click “OK” and wait a few seconds to allow the new

settings to apply.

Boost the coverage of your existing wireless

network’s signal with repeater mode. We

recommend this mode when cabling is

impractical or when you require ﬂexibility to

move the repeater from one room to another.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uspeed Wifi repeater Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Uspeed Wifi repeater

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info