622072
6
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
WS1170 Rev. 04
21.01.2015 ©Velleman nv
6
The alarm will automatically reactivate once the value has
fallen below the set temperature value or if a new value is
entered.
The outdoor weather alarm
When a set outdoor alarm has been triggered, it will flash on the
LCD display. The general outdoor alarm icon and HI / LO alarm
icon will flash accordingly. Example: In outdoor temperature
mode, the dew point icon will flash along the outdoor alarm and
the HI alarm icons when the dew point HI alarm is triggered.
This will indicate that the current alarm source is from the dew
point.
d. MIN / MAX Mode
Press MIN / MAX to enter the MAX mode. MAX and the
maximum record will be displayed.
Press MIN / MAX to enter the MIN mode. MIN and the minimum
record will be displayed.
Press MIN / MAX to return to the normal display mode.
In MAX mode, press + to display the following maximum values with their time and date: Indoor
humidity maximum Indoor temperature maximum Outdoor humidity maximum Outdoor
temperature maximum Pressure maximum.
In MIN mode, press + to display the following minimum values with their time and date: Indoor humidity
minimum Indoor temperature minimum Outdoor humidity minimum Outdoor temperature minimum
Pressure minimum.
Press SNOOZE / LIGHT to return to the normal display mode
Reset
The SET button resets the values in MIN or MAX mode. To reset the values:
In MIN or MAX mode, press and hold SET for 2 seconds to reset the MIN or MAX values and h-the time
and date.
To reset the device, remove the batteries from the device.
e. Calibrating Indoor and Outdoor Humidity
The WS1170 weather station allows you to calibrate both the indoor and the outdoor humidity. Humidity is
a difficult parameter to measure accurately. The calibration option allows you to zero out this error. Note
that you will need a hygrometer calibration pack (not included).
Proceed as follows:
1. Press SET and select the indoor humidity function.
2. Press + or MIN / MAX to increase or decrease the humidity setting in increments of 1 % until the setting
matches the calibrated humidity source.
3. Press and hold SET for 3 seconds to confirm.
4. Do the same for the outdoor humidity function.
Note: The remote outdoor sensor will not display the calibrated humidity level but only the measured
humidity level. The dew point calculation is based on the calibrated humidity level.
9. Troubleshooting
Problem
Possible Cause
Solution
Transmission problem
Distance between the two units is too long
Shielding materials between two units
(thick wall, steel…)
Interference from other sources
Reduce distance
Find a different mounting location
Eliminate interference sources
Data on LCD is illegible
No data reception
Low batteries
Find a different mounting location
Replace batteries
Incorrect data
Low batteries
Incorrect settings
Replace batteries
Reprogram the weather station
10. Technical specifications
Indoor Station
Temperature Range
0°C ~ +60°C (OFL displayed when out of range)
Resolution
0.1°C
Relative Humidity
1% ~ 99%
Resolution
1%
Atmospheric Pressure
919 hPa ~ 1080 hPa
Resolution / Accuracy
0.1 hPa / 1.5 hPa
Alarm Duration
120 sec
Temperature display mode
Dew point HI alarm triggered
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Velleman WS1170 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info