Bedienungsanleitung VTech LM808-1W (Seite 1 von 2) (Englisch)

809800

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Note

• This baby monitor should be for use by adults only.

• It is not a substitute for proper adult supervision, and should not be used as such.

Test your baby monitor

You may test the baby monitor before initial use, and at regular times thereafter.

Caution

• For hearing protection, make sure the parent unit is more

than 1 metre away from the baby unit. If you hear any

feedback, move the parent unit further until the noise

stops. You can also press on the parent unit to reduce

the noise.

1. Make sure your baby unit and parent unit are on.

2. The parent unit displays images from the baby unit.

• Speak towards the microphone of the baby unit.

You will hear the sound at the parent unit.

Note

• When the parent unit displays and then No Link to CAM # (# represents the baby unit

number), and the LINK LED light ﬂashes, move the parent unit closer to the baby unit (observe the

minimum distance of 1 metre). You can also check if the baby unit is connected to a live power socket

and switched on.

Tip

• Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the

baby unit.

Positioning the baby monitor

Caution

• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the

baby’s cot or playpen.

Note

• To avoid interference from other electronic devices, place your

baby monitor at least 1 metre away from devices such as wireless

routers, microwaves, cell phones and computers.

1. Place the baby unit more than 1 metre away from your baby.

2. Adjust the angle of the baby unit camera to aim at your baby.

3. Bend down the temperature sensor so that it stays away from baby unit to avoid deviation

of temperature detection.

4. Place the parent unit more than 1 metre away from the baby unit to avoid feedback.

Power on or off the baby unit

• Slide the ON/OFF switch to ON to turn on the baby unit. The ON/OFF LED light turns on.

• Slide the ON/OFF switch to OFF to turn off the baby unit. The ON/OFF LED light turns off.

Power on or off the parent unit

• Press and hold POWER to turn on the parent unit. The screen turns on.

• Press and hold POWER again to turn off the parent unit. The screen turns off.

Turn on or off the parent unit screen

You can turn on or off the parent unit screen without powering off the parent unit. You can

still hear sound from the baby unit.

• Press and hold LCD ON/OFF on the parent unit to turn off the screen.

• Press any keys on the parent unit to turn on the screen again.

Adjust speaker volume

For parent unit:

• Press or on the parent unit at any time when viewing images. As you adjust the

volume, the number of solid bar shows on indicates the current volume level.

For baby unit:

The baby unit speaker volume determines the lullaby volume and talkback volume

transmitted from parent unit. It can be adjusted in the parent unit.

1. Press when the parent unit is idle.

2. Press or to choose , then press .

3. Press or to choose the desired volume level, Level 1 is the softest while Level 5 is the

loudest. Then, press to conﬁrm your selection.

User’s manual

LM808-1W

Full Colour Video Monitor

1. Press when the parent unit is idle.

2. Press or to choose VOX Sensitivity.

3. Press or to choose the desired sensitivity level.

Tips

• You can adjust the baby unit placement to improve the sound detection.

• If you want to use a sound machine or white noise machine for natural white noise while using this

baby monitor to check on your baby, you can:

- Lower the volume of your sound machine or white noise machine; or

- Lower the sensitivity level of your baby monitor to medium (level 3) or below. Default level is the

highest level.

Turn on or off the sound activation

When Sound activation is on, the parent unit screen remains off to save power when the

baby unit detects no sound.

Once the baby unit detects sounds that are louder than the chosen sound sensitivity level,

the parent unit screen and speaker turn on automatically. The parent unit will then turn off

again after 50 seconds of no sound detection.

1. Press when the parent unit is idle.

2. Press or to choose Sound-activated Screen.

3. Press or to choose On or Off, then press to conﬁrm your selection.

Notes

• If you have muted the parent unit speaker, only the parent unit screen will turn on when a sound is

detected.

• When the parent unit screen is off and it receives alerts, for example, link lost between parent unit

and baby unit, or battery is low, the parent unit screen and speaker will turn on for 10 seconds.

Zoom

You can zoom in while viewing images from the baby unit.

• Press to zoom in.

• Press or to move the zoomed image downward or upward.

• Press or to move the zoomed image leftward or rightward.

• Press again to zoom out.

Talk

You can use the TALK function of the parent unit to comfort your baby.

1. Press and hold TALK on the parent unit. The TALK light turns on.

2. Speak towards the microphone on the parent unit. Your voice is broadcast to the baby unit.

3. Release the TALK key to stop the broadcast.

Notes

• The parent unit speaker is muted during voice broadcast. Sound transmission from the baby unit

resumes after TALK is released.

• The baby unit’s talkback volume can be adjusted via the parent unit menu.

Set alert tone

Low battery tone

You can set the parent unit to beep when the parent unit operates in low battery condition.

1. Press when the parent unit is idle.

2. Press or to choose Alert settings.

3. Press or again to choose Low Battery Tone, then press .

4. Press or to choose On or Off, then press to conﬁrm your selection.

No link alert

You can set the parent unit to beep when the link between the parent unit and the baby unit is

lost.

1. Press when the parent unit is idle.

2. Press or to choose Alert settings.

3. Press or to choose No Link Alert, then press .

4. Press or to choose On or Off, then press to conﬁrm your selection.

Monitor the temperature

Your baby unit monitors the temperature of your baby’s room with its built-in temperature

sensor. If the detected temperature is out of the preset temperature range, the parent unit

will display an alert message.

Set temperature range

You can set the desired room temperature alert range. The minimum temperature can be set

between 11 oC and 20 oC. The maximum temperature can be set between 21 oC and 30 oC.

1. Press when the parent unit is idle.

2. Press or to choose Temperature.

3. Press or to choose Minimum or Maximum, then press .

4. Press or to choose the desired minimum or maximum temperature, then press to

conﬁrm your selection.

Temperature alert tone

You can turn on the temperature alert tone so that the parent unit will emit an alert tone if the

detected temperature is out of range.

1. Press when the parent unit is idle.

2. Press or to choose Temperature.

Connect and charge the battery

What’s in the box

Before use

Using the baby monitor

3 Using the baby monitor (Cont’d)

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Baby unit: 2405 - 2475 MHz

Parent unit: 2405 - 2475 MHz

Maximum power used by the transmitter: 0.1W (100mW)

Channels 32

LCD 5” Colour LCD

(WQVGA 480x272 pixel)

Nominal effective range Actual operating range may vary according to environmental

conditions at the time of use

Power requirements Parent unit: 3.6V Ni-MH battery

Baby unit power adaptor: Output: 5V DC @ 1A

Parent unit power adaptor: Output: 5V DC @ 1A

Technical speciﬁcations

Speciﬁcations are subject to change without notice.

EXIT

Caution

• The default volume of your parent unit is level 4, and the maximum volume is level 7. If you experience

high-pitched screeching noise from your baby monitor while positioning:

- Make sure your baby unit and parent unit are more than 1 metre apart, OR

- Lower the volume of your parent unit.

Operating range

The operating range of the baby monitor is up to 300 metres outdoors. The actual operating

range may vary depending on the environmental conditions and other interferences such as

walls, doors and other obstructions.

Lullaby

The baby monitor has ﬁve lullabies and four soothing sounds for you to comfort your baby.

You can play lullabies or soothing sounds on the baby unit by controlling remotely with the

parent unit.

To play lullabies:

1. Press when the parent unit is idle.

2. Press or to choose Play Lullaby.

3. Press or to choose Play Melodies, then press .

4. Press or to choose a lullaby, or choose Play All, then press .

• If Play All is selected, the ﬁve lullabies will be played one after the other, until all of

them are played.

5. When the desired lullaby is selected, press or to choose Play, then press .

To play soothing sounds:

1. Press when the parent unit is idle.

2. Press or to choose Play Lullaby.

3. Press or to choose Play Soothing Sounds, then press .

4. Press or to choose a soothing sound, then press .

To stop lullabies or soothing sounds:

1. Press when the parent unit is idle.

2. Press or to choose Play Lullaby.

3. Press or to choose Stop, then press .

To set auto timer for lullabies:

While the baby unit is playing a lullaby or soothing sound, the auto timer feature automatically

stops the lullaby or soothing sound after playing for 15/30/45/60 minutes. You can set auto

timer for lullabies with the parent unit.

1. Press when the parent unit is idle.

2. Press or to choose Play Lullaby.

3. Press or to choose Auto Timer, then press .

4. Press or to choose the desired lullabies duration, then press to conﬁrm your selection.

After 15/30/45/60 minutes, the lullaby or soothing sound will stop automatically.

Adjust LCD brightness

You can change the brightness of the parent unit screen from Level 1 to Level 5. The LCD

brightness is preset to Level 3.

1. Press when the parent unit is idle.

2. Press or to choose Brightness.

3. Press or to choose the desired level of brightness.

Turn on and off the dim mode

The dim mode helps save parent unit power. Your parent unit display will dim automatically

after 10 minutes of inactivity, when no keys are pressed or alerts are received from the baby

unit.

NOTESNOTE

Note

• While the screen is dimmed, any keypress or alert message will trigger the screen to return to the

preset brightness level. After 10 minutes of inactivity, it will dim again.

Adjust the sound sensitivity of the baby unit

You can turn on Sound activation and adjust the VOX sensitivity to detect sounds and turn

on the parent unit while its screen is switched off or dimmed.

When the baby unit detects sounds that exceed certain levels, the parent unit screen will

turn on and the baby unit starts transmitting the sounds to the parent unit, and you can see

and hear your baby. If you have turned on the Night light Auto-on and the Projection light

Auto-on feature, they will turn on automatically to sooth your baby.

If you turn off Sound activation, you will hear sounds from the baby unit all the time, even

when the parent unit screen is switched off.

63

> 1 metre

63

> 3ft (1m)

63



1metre

Connect the baby monitor

NOTESNOTE

• The rechargeable battery in the parent unit is built-in.

• Use only the power adaptors supplied with this product.

• Make sure the baby monitor is not connected to a switch-controlled electric outlet.

• Connect the power adaptors in a vertical or ﬂoor mount position only. The adaptors’ prongs are not

designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table,

or cabinet outlets. Otherwise, the adaptors may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adaptor cords are out of reach of children.

Charge the parent unit battery

When you have connected the parent unit and installed its battery for the ﬁrst time or after

power outage, the parent unit powers on automatically. The battery icon indicates the

battery status (see the following table).

NOTESNOTE

Notes

• Before using the baby monitor for the ﬁrst time, charge the parent unit battery for 12 hours. When

the parent unit battery is fully charged, the battery icon becomes solid .

• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,

turn the parent unit off while charging.

• The standby time varies depending on the sensitivity level you set, your actual use and the age of the

battery.

Battery indicators Battery status Action

The battery icon is off and

displays .

Parent unit operates

using AC power, and is

charging the battery.

The screen displays the

low battery alert

and the battery icon

becomes .

The battery has very little

charge and may be used

for only a short time.

Charge without interruption (about 30

minutes).

The battery icon becomes

The battery is fully

charged.

To keep the battery charged, connect

it to AC power when not in use.

Credits:

The Background Noise sound ﬁle was created by Caroline Ford, and is used under the Creative

Commons license.

The Stream Noise sound ﬁle was created by Caroline Ford, and is used under the Creative

Commons license.

The Crickets At Night sound ﬁle was created by Mike Koenig, and is used under the Creative

Commons license.

The Heart Beat sound ﬁle was created by Zarabadeu, and is used under the Creative Commons

license.

> 1metre

< 1metre



> 3ft (1m)

﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏﹏

< 3ft (1m)

63



≥

< 3ft (1m)

3ft (1m)

63ē

> 1metre

< 1metre



The applied nameplate is located at the bottom of the baby

unit’s base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock

and injury, including the following:

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above

2 metres.

4. This product is not a substitute for adult supervision of the

infant. Supervising the infant is the responsibility of the

parent or carer. This product could cease operating, and

therefore you should not assume it will continue working

properly for any given period of time. Further, this is not

a medical device and should not be used as such. This

product is intended to assist you in supervising your baby.

5. Do not use this product near water, for example, near to

a bath, sink, swimming pool or shower.

6. CAUTION: Use only the battery provided. There may be

a risk of explosion if a wrong type of battery is used for

the parent unit. The battery cannot be subjected to high

or low extreme temperature and low air pressure at high

altitude during use, storage or transportation. Disposal of

battery into ﬁre or a hot oven, or mechanically crushing or

cutting or the battery can result in an explosion. Leaving

the battery in an extremely high temperature surrounding

environment can result in an explosion or the leakage of

ﬂammable liquid of gas. Battery subjected to extremely

low air pressure may result in an explosion or the leakage

of ﬂammable liquid or gas. Dispose of used battery

according to the instructions.

7. Use only the adaptors included with this product.

Incorrect adaptor polarity or voltage can seriously

damage the product.

Baby unit power adaptor: Output: 5V DC 1A;

Parent unit power adaptor: Output: 5V DC 1A.

Use only adaptors and battery listed below.

Power adaptor information:

VTech Telecommunications Limited.

Model : VT05EUK05100(UK), VT05EEU05100(EU)

Rechargeable battery information:

Corun - Ni-MH AAA900mAh 3.6V

Ni-MH AAA900mAh 3.6V

9. The power adaptors are intended to be correctly oriented

in a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet should

be installed near the equipment and should be easily

accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

12. Do not cut off the power adaptors to replace them with

other plugs, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supply in your home,

consult your dealer or local power company.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf,

stand or other unstable surfaces.

17. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these

openings must not be blocked by placing the product

on a soft surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or heat

source.

18. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any

kind on the product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the product other than

speciﬁed access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can

cause electric shock when the product is subsequently

used.

20. You should test the sound reception every time you turn

on the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using

certainelectronic devices, such as baby monitors,

cordless telephones,etc. To protect your privacy, make

sure the product has never beenused before purchase,

reset the baby monitor periodically bypowering off

and then powering on the units, and power off thebaby

monitor if you will not use it for some time.

23. Children should be supervised to ensure that they do not

play with the product.

24. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between 0oC

and 40oC.

2. Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

3. Batteries should not be exposed to

excessive heat such as bright sunshine or

ﬁre.

4. Warning—Strangulation Hazard—

Children have STRANGLED in cords. Keep this cord out

of the reach of children (more than 0.9 m away). Do not

remove this tag.

5. Never place the baby unit(s) inside the baby’s cot or

playpen. Never cover the baby unit(s) or parent unit with

anything such as a towel or a blanket.

6. Other electronic products may cause interference with

your baby monitor. Try installing your baby monitor

as far away from these electronic devices as possible:

wireless routers, radios, cellular telephones, intercoms,

room monitors, televisions, personal computers,

kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and implanted

cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic ﬁelds (EMF)

This VTech product complies with all standards regarding

electromagnetic ﬁelds (EMF). If handled properly and

according to the instructions in this user’s manual, the product

is safe to be used based on scientiﬁc evidence available

today.

Important safety instructions

VOX

Sensitivity

level Level 5

(Highest)

Level 4

(High)

Level 3

(Medium)

Level 2

(Low)

Level 1

(Lowest)

Description (Default setting)

The parent unit

screen and speaker

turn on for very small

sounds, including

background noises

from your baby’s room.

The parent unit screen

and speaker turn on

for soft babbling

and louder sounds

from your baby. The

parent unit remains

quiet when your baby

sleeps soundly.

The parent unit screen

and speaker turns on

for loud babbling and

louder sounds from

your baby. The parent

unit remains quiet

when your baby makes

soft sounds.

The parent unit screen

and speaker turn on

for crying and louder

sounds from your

baby. The parent unit

remains quiet when

your baby makes soft

sounds.

The parent unit screen

and speaker turn on

for loud crying or

screeching sounds

from your baby. The

parent unit remains

quiet when your baby

makes soft sounds.

VTech LM808-1W Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info