Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Before commissioning:
1. We recommend that the user takes appropriate protective measures, ideally protective masks, which
adequately protect the mouth, eyes and nose from the ozone gas at all times.
2. Since the ozone generator converts existing oxygen into ozone, we recommend that the room/object be well
ventilated before commissioning to ensure that there is as much oxygen as possible in the room/object.
3. For safety reasons, it should also be possible to check the power supply from outside the room where the
ozone generator is to be used in order to be able to quickly interrupt the operation of the ozone generator at
any time. We therefore recommend that you connect the ozone generator to a power socket that is located
outside the operating room/premises.
Instructions for use:
1. Description of the control panel:
2. Commissioning
Observe the safety instructions !
Plug the mains plug properly into the socket and place the ozone generator as centrally as possible and, if
possible, halfway up the room.
Switch the ozone generator ON with the large square operating switch. Then select the desired operating mode
(see description of the control panel). These are:
